PR-URL: https://github.com/nodejs/node/pull/55019
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
The native error messages can sometimes contain e.g. path content
that are typically passed in as chars with UTF8-encoded code points.
The native error throwing code previously always decode the chars
as Latin-1, which would be incorrect.
PR-URL: https://github.com/nodejs/node/pull/55024
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Refs: https://github.com/nodejs/node/issues/53382
TLS spec seems to indicate there should should be a response
sent when TLS handshake fails. See
https://datatracker.ietf.org/doc/html/rfc8446#page-85
When compiled with OpenSSL32 we see the
the following response '15 03 03 00 02 02 16' which
decodes as a fatal (0x02) TLS error alert number 22 (0x16).
which corresponds to TLS1_AD_RECORD_OVERFLOW which matches
the error we see if NODE_DEBUG is turned on once you get
through the define aliases.
If there is a response from the server the test used to
hang because the end event will not be emitted until after
the response is consumed. This PR fixes the test so
it consumes the response.
Some earlier OpenSSL versions did not seem to send a response but
the error handling seems to have been re-written/improved
in OpenSSL32.
Signed-off-by: Michael Dawson <midawson@redhat.com>
PR-URL: https://github.com/nodejs/node/pull/55089
Refs: https://github.com/nodejs/node/issues/52482
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Jithil P Ponnan <jithil@outlook.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Tests should pass even if the path where the repo is cloned contains
URL-significant chars.
PR-URL: https://github.com/nodejs/node/pull/55082
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/53757
Reviewed-By: Mohammed Keyvanzadeh <mohammadkeyvanzade94@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <midawson@redhat.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
This reverts commit 2a871df3df.
It has been almost three years since the test was marked flaky. Remove
the unstable designation to see if the problem persists on Windows.
Fixes: https://github.com/nodejs/node/issues/40728
PR-URL: https://github.com/nodejs/node/pull/55079
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
Reviewed-By: Jake Yuesong Li <jake.yuesong@gmail.com>
Reviewed-By: Moshe Atlow <moshe@atlow.co.il>
Reviewed-By: Stefan Stojanovic <stefan.stojanovic@janeasystems.com>
This patch implements a "module-sync" exports condition
for packages to supply a sycnrhonous ES module to the
Node.js module loader, no matter it's being required
or imported. This is similar to the "module" condition
that bundlers have been using to support `require(esm)`
in Node.js, and allows dual-package authors to opt into
ESM-first only newer versions of Node.js that supports
require(esm) while avoiding the dual-package hazard.
```json
{
"type": "module",
"exports": {
"node": {
// On new version of Node.js, both require() and import get
// the ESM version
"module-sync": "./index.js",
// On older version of Node.js, where "module" and
// require(esm) are not supported, use the transpiled CJS version
// to avoid dual-package hazard. Library authors can decide
// to drop support for older versions of Node.js when they think
// it's time.
"default": "./dist/index.cjs"
},
// On any other environment, use the ESM version.
"default": "./index.js"
}
}
```
We end up implementing a condition with a different name
instead of reusing "module", because existing code in the
ecosystem using the "module" condition sometimes also expect
the module resolution for these ESM files to work in CJS
style, which is supported by bundlers, but the native
Node.js loader has intentionally made ESM resolution
different from CJS resolution (e.g. forbidding `import
'./noext'` or `import './directory'`), so it would be
semver-major to implement a `"module"` condition
without implementing the forbidden ESM resolution rules.
For now, this just implments a new condition as semver-minor
so it can be backported to older LTS.
Refs: https://webpack.js.org/guides/package-exports/#target-environment-independent-packages
PR-URL: https://github.com/nodejs/node/pull/54648
Fixes: https://github.com/nodejs/node/issues/52173
Refs: https://github.com/joyeecheung/test-module-condition
Refs: https://github.com/nodejs/node/issues/52697
Reviewed-By: Jacob Smith <jacob@frende.me>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
This essentially reverts e0e0b1a70e.
We don't bundle ESLint anymore, so the change is no longer needed.
PR-URL: https://github.com/nodejs/node/pull/55042
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/53381
Reviewed-By: Vinícius Lourenço Claro Cardoso <contact@viniciusl.com.br>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Antoine du Hamel <duhamelantoine1995@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/55006
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jake Yuesong Li <jake.yuesong@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/54950
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michael Dawson <midawson@redhat.com>
Reviewed-By: Marco Ippolito <marcoippolito54@gmail.com>
Reviewed-By: Rafael Gonzaga <rafael.nunu@hotmail.com>
PR-URL: https://github.com/nodejs/node/pull/54957
Reviewed-By: Robert Nagy <ronagy@icloud.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/52861
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rafael Gonzaga <rafael.nunu@hotmail.com>
PR-URL: https://github.com/nodejs/node/pull/55050
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Chemi Atlow <chemi@atlow.co.il>
PR-URL: https://github.com/nodejs/node/pull/55025
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Jake Yuesong Li <jake.yuesong@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/55025
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Jake Yuesong Li <jake.yuesong@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/55036
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Chemi Atlow <chemi@atlow.co.il>
Refs: https://github.com/nodejs/node/issues/53382
OpenSSL32 does not support AES128 and DH 1024 to
update test to use newer algorithms.
Signed-off-by: Michael Dawson <midawson@redhat.com>
PR-URL: https://github.com/nodejs/node/pull/55030
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/55029
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jake Yuesong Li <jake.yuesong@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
We had a bunch of tests that would fail if run from an executable that
contains any char that should be escaped when run from a shell.
PR-URL: https://github.com/nodejs/node/pull/55028
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Marco Ippolito <marcoippolito54@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Because of the double encoding, the test would fail as soon as the path
contains a space or any other char that's already encoded by
`pathToFileURL`.
PR-URL: https://github.com/nodejs/node/pull/55026
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
