Implementing the suggestion in
https://github.com/nodejs/node/issues/4554 this pull request renames
the parameter name in all the places that accept an event name as a parameter.
Previously, the parameter has been called `event` or `type`. Now as suggested
it is consistently called `eventName`.
PR-URL: https://github.com/nodejs/node/pull/5850
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Now that the CTC has expanded, this PR calls for a vote of the CTC
to reinstate Michael Dawson (@mhdawson) as a full voting member.
Voted on and approved by the CTC on 2016-03-23
PR-URL: https://github.com/nodejs/node/pull/5633
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Alexis Campailla <orangemocha@nodejs.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Readable.resume() schedules the resume operation onto the next tick,
whereas pause() has immediate effect. This means that in a sequence
stream.resume();
stream.pause();
.. the 'pause' event will be triggered before the resume operation
is performed.
For process.stdin, we are relying on the 'pause' event to stop reading
on the underlying handle. This fix ensures that reads are started and
stopped in the same order as resume() and pause() are called.
PR-URL: https://github.com/nodejs/node/pull/5776
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: jasnell - James M Snell <jasnell@gmail.com>
The tty.ReadStream constructor initializes this as a socket,
which causes a read to be initiated. Even though during stdin
initalization we call readStop shortly after, the read operation
can consume keypress events from the system buffers.
Fixes: https://github.com/nodejs/node/issues/5384
PR-URL: https://github.com/nodejs/node/pull/5776
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: jasnell - James M Snell <jasnell@gmail.com>
Fail early in require('crypto'), require('tls'),
require('https'), etc when crypto is not available
(rather than depending on an internal try/catch).
Add documentation for detecting when crypto is not available.
PR-URL: https://github.com/nodejs/node/pull/5611
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Only treat the gzip magic bytes, when encountered within the file
after reading a single block, as the start of a new member when
the previous member has ended.
Add test files that reliably reproduce #5852. The gzipped file
in test/fixtures/pseudo-multimember-gzip.gz contains the gzip
magic bytes exactly at the position that node encounters after having
read a single block, leading it to believe that a new data
member is starting.
Fixes: https://github.com/nodejs/node/issues/5852
PR-URL: https://github.com/nodejs/node/pull/5863
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Using let in for loops showed a regression in 4.4.0. @ofrobots
suggested that we avoid using let in for loops until TurboFan becomes
the default optimiser.
The regression that was detected was when looking at how long it took
to create a new buffer from an array of data.
When using `for (let i=0; i<length; i++) ` we saw the operation take
almost 40% longer compared to `var i=0`.
PR-URL: https://github.com/nodejs/node/pull/5819
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Trevor Norris <trevnorris@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Ref: http://github.com/nodejs/benchmarking/issues/38
Event 9 must include the string terminator in the last descriptor.
Event 23 must be published with no descriptors, in accordance with
the manifest.
PR-URL: https://github.com/nodejs/node/pull/5742
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
reduce using RegExp for string test. This pull reuqest replaces
various usages of regular expressions in favor of the ES2015
startsWith and endsWith methods.
PR-URL: https://github.com/nodejs/node/pull/5753
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Fixes a copy typo in the events.md docs.
PR-URL: https://github.com/nodejs/node/pull/5849
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The create_android_makefiles script will create .mk files for node and
all of its dependencies ready to be build using Android build system.
Signed-off-by: Robert Chiras <robert.chiras@intel.com>
PR-URL: https://github.com/nodejs/node/pull/5544
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Modified android-configure script to support also x86 arch.
Currently added support only for ia32 target arch.
Also, compile openssl without asm, since using the asm sources will make
node fail to run on Android, because it adds text relocations.
Signed-off-by: Robert Chiras <robert.chiras@intel.com>
PR-URL: https://github.com/nodejs/node/pull/5544
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Currently we use `{}` for the `lookup` function to find the relevant
resolver to the dns.resolve function. It is preferable to use an
object without a Object.prototype, currently for example you can do
something like:
```js
dns.resolve("google.com", "toString", console.log);
```
And get `[Object undefined]` logged and the callback would never be
called. This is unexpected and strange behavior in my opinion.
In addition, if someone adds a property to `Object.prototype` might
also create unexpected results.
This pull request fixes it, with it an appropriate error is thrown.
PR-URL: https://github.com/nodejs/node/pull/5843
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Refactor a forEach to a `map` in the `setServers` function of the
dns module - simplifying the code. In addition, use more descriptive
variable names and `const` over `var` where possible.
PR-URL: https://github.com/nodejs/node/pull/5803
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Based on the conversation in #4243 this implements a way to increase
and decrease the size of the thread pool used in v8.
Currently v8 restricts the thread pool size to `kMaxThreadPoolSize`
which at this commit is (4). So it is only possible to
decrease the thread pool size at the time of this commit. However with
changes upstream this could change at a later date.
If set to 0 then v8 would choose an appropriate size of the thread pool
based on the number of online processors.
PR-URL: https://github.com/nodejs/node/pull/4344
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/5813
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
The check to determine whether `noAssert` was set to true and thus
whether RangeErrors should be thrown was happening after the write was
truncated to the available size of the buffer. These checks now occur in
the correct order.
Fixes: https://github.com/nodejs/node/issues/5587
PR-URL: https://github.com/nodejs/node/pull/5605
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
4d78121b77 had lint errors that went
undetected. This fixes them.
PR-URL: https://github.com/nodejs/node/pull/5840
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
It's possible that the `end` event is emitted after the timeout fires
causing the test to fail. Just remove the timer. If for some reason the
`end` would never fire, the test will fail with a timeout.
PR-URL: https://github.com/nodejs/node/pull/5129
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
It checks that `eval` is called with `.scope` as an input string.
PR-URL: https://github.com/nodejs/node/pull/5534
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
[Diffie-Hellman](https://en.wikipedia.org/wiki/Diffie%E2%80%93Hellman_key_exchange#Cryptographic_explanation)
keys are composed of a `generator` a `prime` a `secret_key`
and the `public_key` resulting from the math operation:
```
(generator ^ secret_key) mod prime = public_key
```
Diffie-Hellman keypairs will compute a matching shared secret
if and only if the generator and prime match for both
recipients. The generator is usually **2** and the prime is
what is called a [Safe Prime](https://en.wikipedia.org/wiki/Safe_prime).
Usually this matching is accomplished by using
[standard published groups](http://tools.ietf.org/html/rfc3526).
We expose access those groups with the `crypto.getDiffieHellman`
function.
`createDiffieHellman` is trickier to use. The original example
had the user creating 11 bit keys, and creating random groups of
generators and primes. 11 bit keys are very very small, can be
cracked by a single person on a single sheet of paper. A
byproduct of using such small keys were that it was a high
likelihood that two calls of `createDiffieHellman(11)` would
result in using the same 11 bit safe prime.
The original example code would fail when the safe primes generated
at 11 bit lengths did not match for alice and bob.
If you want to use your own generated safe `prime` then the proper
use of `createDiffieHellman` is to pass the `prime` and `generator`
to the recipient's constructor, so that when they compute the shared
secret their `prime` and `generator` match, which is fundamental to
the algorithm.
PR-URL: https://github.com/nodejs/node/pull/5505
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
use String.prototype.repeat() to simplify code, less code,
more semantically.
PR-URL: https://github.com/nodejs/node/pull/5359
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Added a hint saying that node uses the default "Cannot find module"
error when requiring a module for which the "main" file specified in
the package.json is missing.
PR-URL: https://github.com/nodejs/node/pull/5812
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This page is mostly a mirror of the updated manual page.
PR-URL: https://github.com/nodejs/node/pull/5787
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell jasnell@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: Robert Lindstädt <robert.lindstaedt@gmail.com>
Add stricter testing for the isLegalPort method in internal/net.
This ensures that odd inputs such as isLegalPort(true) and
isLegalPort([1]) aren't acceptable as valid port inputs.
PR-URL: https://github.com/nodejs/node/pull/5733
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Improve the robustness of test-net-connect-options-ipv6.js
PPC Suse build team encountered intermittent failures related
to dns. Improve test to make it more robust in the face
of intermittent dns issues.
PR-URL: https://github.com/nodejs/node/pull/5791
Reviewed-By: James M Snell <jasnell@gmail.com>
Don't check that the `disconnect` event is emitted before the `exit`
event as the order is not guaranteed.
PR-URL: https://github.com/nodejs/node/pull/5814
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Test was flaky on centos7-64 due to an uncaught ECONNRESET
on the worker code. This catches the error so the process
will exit with code 0.
Fixes: https://github.com/nodejs/node/issues/5604
PR-URL: https://github.com/nodejs/node/pull/5802
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Currently the DNS module imports isIP from both cares and `net` and
uses both of them both throughout the code base. This PR removes the
direct dependency `dns` has on `net` and uses `isIp` from c-ares all
the time. Note that both functions do the same thing.
PR-URL: https://github.com/nodejs/node/pull/5804
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Added appropriate in-document links. Clarified a bit of
`setImmediate`, including a quick grammar fix (plural possessive
apostrophe).
PR-URL: https://github.com/nodejs/node/pull/5792
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
This uses libuv's mkdtemp function to provide a way to create a
temporary folder, using a prefix as the path. The prefix is appended
six random characters. The callback function will receive the name
of the folder that was created.
Usage example:
fs.mkdtemp('/tmp/foo-', function(err, folder) {
console.log(folder);
// Prints: /tmp/foo-Tedi42
});
The fs.mkdtempSync version is also provided. Usage example:
console.log(fs.mkdtemp('/tmp/foo-'));
// Prints: tmp/foo-Tedi42
This pull request also includes the relevant documentation changes
and tests.
PR-URL: https://github.com/nodejs/node/pull/5333
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
