Close the connection immediately after receiving the `end` event to
avoid that the `timeout` event is fired before the connection closes
gracefully.
Move the test back to parallel.
PR-URL: https://github.com/nodejs/node/pull/19856
Fixes: https://github.com/nodejs/node/issues/19804
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This fixes negation ommitted in a former commit.
It also simplifies the text in general.
PR-URL: https://github.com/nodejs/node/pull/19752
Refs: 80ea0c5a64
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
From the zlib v1.2.11 manual:
> ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
> int windowBits));
>
> ...
> windowBits can also be zero to request that inflate use the window
> size in the zlib header of the compressed stream.
The current validation of windowBits in zlib.js doesn't check for this
case.
PR-URL: https://github.com/nodejs/node/pull/19686
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Original commit message:
[intl] unbreak build with ICU 57
Remove a call to `icu::toUCharPtr()` that wasn't present in other
similar looking call sites either, just reinterpret_cast directly.
Fixes https://github.com/nodejs/node/issues/19656.
Cq-Include-Trybots: luci.v8.try:v8_linux_noi18n_rel_ng
Change-Id: If281ce0a39356aa8bd20efb24c3e4b52b06841a3
Reviewed-on: https://chromium-review.googlesource.com/987953
Reviewed-by: Daniel Ehrenberg <littledan@chromium.org>
Commit-Queue: Ben Noordhuis <info@bnoordhuis.nl>
Cr-Commit-Position: refs/heads/master@{#52311}
PR-URL: https://github.com/nodejs/node/pull/19710
Fixes: https://github.com/nodejs/node/issues/19656
Refs: b767cde1e7
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Steven R Loomis <srloomis@us.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Adds a test for module loading when throwing undefined or null.
PR-URL: https://github.com/nodejs/node/pull/19282
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
In addition to `--pending-deprecation`, emit a deprecation warning
for usage of the `Buffer()` constructor for call sites that are outside
of `node_modules`.
The goal of this is to better target developers, rather than
burdening users with an omnipresent and quickly ignored warning.
This implements the result of a TSC meeting discussion
from March 22, 2018.
PR-URL: https://github.com/nodejs/node/pull/19524
Refs: https://github.com/nodejs/node/issues/19079#issuecomment-375121443
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
test: refactor parallel/test-tls-delayed-attach
Added description to the test, replace function with arrow function and
implemented common.mustCall
PR-URL: https://github.com/nodejs/node/pull/19421
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
The introduction of `.bytesRead` to zlib streams was unfortunate,
because other streams in Node.js core use the exact opposite naming
of `.bytesRead` and `.bytesWritten`.
While one could see how the original naming makes sense in
a `Transform` stream context, we should try to work towards more
consistent APIs in core for these things.
This introduces `zlib.bytesWritten` and documentation-only deprecates
`zlib.bytesRead`.
PR-URL: https://github.com/nodejs/node/pull/19414
Refs: https://github.com/nodejs/node/issues/8874
Refs: https://github.com/nodejs/node/pull/13088
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Currently whatwg URLs fail with an incorrect error when null is
passed as the base. Adding a check before accessing a symbol
for the URL makes the URL error correctly. Add test for it.
PR-URL: https://github.com/nodejs/node/pull/19299
Fixes: https://github.com/nodejs/node/issues/19254
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
* improve usage of "coerce" in buffer.md
* reduce informal tone in buffer.md
* wrap line at 80 characters in buffer.md
* wrap value in backtick for consistency
PR-URL: https://github.com/nodejs/node/pull/19861
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
OpenSSL-1.1.0 requires the nasm assembler for building asm files on
Windows. This finds nasm at \Program Files\NASM\nasm.exe or
\ProgramFiles(x86)\NASM\nasm.exe in vcbuild.bat for users who did not
add its path in their enviroments.
Fixes: https://github.com/nodejs/build/issues/1190
Fixes: https://github.com/nodejs/node/issues/4270
PR-URL: https://github.com/nodejs/node/pull/19794
Reviewed-By: Shigeki Ohtsu <ohtsu@ohtsu.org>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
All version-specific methods were deprecated in OpenSSL 1.1.0 and
min/max versions explicitly need to be set.
This still keeps comptatible with JS and OpenSSL-1.0.2 APIs for now.
crypto, constants: add constant of OpenSSL-1.1.0
Several constants for OpenSSL-1.1.0 engine were removed and renamed in
OpenSSL-1.1.0. This added one renamed constant in order to have a
compatible feature with that of OpenSSL-1.0.2.
Other missed or new constants in OpenSSL-1.1.0 are not yet added.
crypto,tls,constants: remove OpenSSL1.0.2 support
This is semver-majar change so that we need not to have
compatibilities with older versions.
Fixes: https://github.com/nodejs/node/issues/4270
PR-URL: https://github.com/nodejs/node/pull/19794
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
After upgrading OpenSSL-1.1.0, header files depends on architectures
were changed. This fixes to copy all `deps/openssl/config/*.h' into
the install directory.
Fixes: https://github.com/nodejs/node/issues/4270
PR-URL: https://github.com/nodejs/node/pull/19794
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
This option was made from the floating patch of d269e07.
It is no longer needed because the issue was resolved in
OpenSSL-1.1.0.
Fixes: https://github.com/nodejs/node/issues/4270
PR-URL: https://github.com/nodejs/node/pull/19794
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
- For Windows, nasm is new build requirements and openssl_no_asm is
set to 1 with warning if it is not installed.
- For use of openssl assemble codes, either gas_version >= 2.23,
xcode_version >= 5.0 ,llvm_version >= 3.3 or nasm_version >= 2.10 is
needed. Otherwise, openssl_no_asm is set to 1 with warning.
- FIPS is not supported in OpenSSL-1.1.0 so that it leads an error
when openssl_fips options is enabled in configure.
Fixes: https://github.com/nodejs/node/issues/4270
PR-URL: https://github.com/nodejs/node/pull/19794
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
This commit has a new binding scheme in builing OpenSSL-1.1.0 library
with Node. OpenSSL-1.1.0 uses a new build system with perl for various
supported platforms. See `Configurations/README` and
`Configurations/README.design` in the OpenSSL source for details.
In order to build OpenSSL library without perl in the build of Node
for various supported platforms, platform dependent files (e.g. asm
and header files ) are pre-generated and stored into the `config/arch`
directory.
- Makefile and generate_gypi.pl
Makefile has supported platform list and generates and copies platform
dependent files (e.g. asm files) into arch directory with
generate_gypi.pl. Platform dependent gypi files also created obtaining
build information from `configdata.pm` that is generated with
`Configure` in the OpenSSL build system.
For Windows, `Configure` generates makefile that is only available to
nmake command. Since nmake is not supported in Linux,
`Makefile_VC-WIN32` and `Makefile_VC-WIN64A` are made created by hand
for the use of GNU make. If make rules or targets are changed in the
version up of OpenSSL, they should be also updated.
The following files are used in upgrading openssl-1.1.0.
- gyp and gypi files
openssl.gyp has two targets of openssl and openssl-cli referred from
node.gyp. They includes asm and no_asm gypi files with arch dependent
gypi according to its build options and platforms . The gyp data which
is common with asm and no_asm are stored in openssl_common.gypi.
- header files
bn_conf.h, dso_conf.h and opensslconf.h are platform dependent in the
OpenSSL sources. They are replaced with *.h.tmpl files to include the
file in the `../../../config/` and referred to each arch files that
depends on asm and no-asm option.
Fixes: https://github.com/nodejs/node/issues/4270
PR-URL: https://github.com/nodejs/node/pull/19794
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
This is a floating patch against OpenSSL-1.1.0 to generate asm files
with Makefile rules and it is to be submitted to the upstream.
Fixes: https://github.com/nodejs/node/issues/4270
PR-URL: https://github.com/nodejs/node/pull/19794
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
numbers which are coerced to scientific notation via .toString(),
will behave unexpectedly when assigned to a url's port.
Fixes: https://github.com/nodejs/node/issues/19595
PR-URL: https://github.com/nodejs/node/pull/19645
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This commit removes util.h from tls_wrap.h and adds util-inl.h to
tls_wrap.cc which does use it.
PR-URL: https://github.com/nodejs/node/pull/19849
Reviewed-By: James M Snell <jasnell@gmail.com>
The nonce must be transmitted along with ciphertext and tag.
PR-URL: https://github.com/nodejs/node/pull/19851
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Replace `{Array}` with `{type[]}`.
PR-URL: https://github.com/nodejs/node/pull/19895
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
changes the base instance for ERR_HTTP2_HEADER_SINGLE_VALUE
from Error to TypeError as a more accurate representation
of the error. Additionally corrects the grammar of the error
message.
PR-URL: https://github.com/nodejs/node/pull/19805
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
changes the base instance for ERR_HTTP2_INVALID_PSEUDOHEADER
from Error to TypeError as a more accurate representation
of the error.
PR-URL: https://github.com/nodejs/node/pull/19808
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Re-`require()` the addon after clearing its cache to ensure that it is
re-initialized via the well-known symbol.
PR-URL: https://github.com/nodejs/node/pull/19875
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Conform return statements to the style guide and tool parsers.
Also bring back a description fragment
that seems to be erroneously deleted in
1e07acd476
PR-URL: https://github.com/nodejs/node/pull/19853
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
* Updated tests for `Number` and `int32_t`
* Added new tests for `int64_t`
* Updated N-API `int64_t` behavior to return zero for all non-finite
numbers
* Clarified the documentation for these calls.
PR-URL: https://github.com/nodejs/node/pull/19402
Refs: https://github.com/nodejs/node-chakracore/pull/500
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Modernize:
* Replace `var` with `const` / `let`.
* Wrap `switch` cases with `const`/`let` in blocks.
* Replace common functions with arrow functions.
* Replace string concatenation with template literals.
* Shorthand object literals.
* Use destructuring and spread.
Optimize:
* Move RegExp declaration out of loops.
* Replace `.match()` with `.test()` in boolean context.
* Replace RegExp with string when string suffices.
* Make RegExp more strict to reject unrelated cases.
* Make RegExp do the trimming to eliminate many `.trim()` calls.
* Cache retrieved object properties.
* Remove conditions that cannot be false.
* Remove code that seems obsolete
(it means a state that cannot happen or is not typical).
Clarify:
* Sync code examples in comments with the actual source state.
* Expand some one-letter variable names.
* Rename confusingly similar variables.
* Move variable declarations closer to their context.
* Remove non-actual commented out code.
* Unify blank lines between top-level blocks.
Fix:
* Fix conditions that cannot be true.
Guard:
* Throw on unexpected state more often.
PR-URL: https://github.com/nodejs/node/pull/19832
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Update the docs to provide clearer instructions regarding the exact
scope of the use (and re-use) of an IV, stating the instructions
explicitly with greater clarity.
PR-URL: https://github.com/nodejs/node/pull/19810
Fixes: https://github.com/nodejs/node/issues/19748
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
uses the same approach as in test-fs-readfile-pipe-large
PR-URL: https://github.com/nodejs/node/pull/19420
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Clarify current behavior of http2server.close() and
http2secureServer.close() w.r.t. perceived differences
when compared with httpServer.close().
Fixes: https://github.com/nodejs/node/issues/19711
PR-URL: https://github.com/nodejs/node/pull/19802
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Currently calling StringBytes::Encode on a UCS2 buffer
results in two copies of the buffer and the usage of
std::vector::assign makes the memory usage unpredictable,
and therefore hard to test against.
This patch makes the memory usage more predictable by
allocating the memory using node::UncheckedMalloc and
handles the memory allocation failure properly. Only
one copy of the buffer will be created and it will
be freed upon GC of the string.
PR-URL: https://github.com/nodejs/node/pull/19798
Refs: https://github.com/nodejs/node/pull/19739
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
