- Implements the make test-doc target that build, verify
and lint docs
- Lint the C++ snippets in addon docs
- When generating addons and running the JS linter,
use the global node executable if it is not built.
Therefore one does not have to build node in order to
run make test-doc.
PR-URL: https://github.com/nodejs/node/pull/16377
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Currently it can be a little difficult to detect errors in the output
from the doc target. This commit suggests reducing the output to make it
easier to identify errors.
PR-URL: https://github.com/nodejs/node/pull/16516
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
_read should always resume the underlying code that is attempting
to push data to a readable stream. Adjust http2 core code to
resume its reading appropriately.
Some other general cleanup around reading, resuming & draining.
PR-URL: https://github.com/nodejs/node/pull/16580
Fixes: https://github.com/nodejs/node/issues/16578
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
The same as https://github.com/nodejs/node/pull/16031 except
for N-API addons.
PR-URL: https://github.com/nodejs/node/pull/16380
Fixes: https://github.com/nodejs/node/issues/13521
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Fixes: https://github.com/nodejs/node/issues/14847
PR-URL: https://github.com/nodejs/node/pull/16511
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
On 4 April 2017, Node.js versions v4.8.2 and v6.10.2 were
released. These versions bumped the vendored zlib library from
v1.2.8 to v1.2.11 in response to what it describes as low-severity
CVEs. In zlib v1.2.9, a change was made that causes an error to be
raised when a raw deflate stream is initialised with windowBits set
to 8.
In zlib v1.2.9, 8 become an invalid value for this parameter, and Node's zlib
module will crash if you call this:
```
zlib.createDeflateRaw({windowBits: 8})
```
On some versions this crashes Node and you cannot recover from it, while on some
versions it throws an exception. The permessage-deflate library up to
version v0.1.5 does make such a call with no try/catch
This commit reverts to the original behavior of zlib by gracefully changed
windowBits: 8 to windowBits: 9 for raw deflate streams.
Original-PR-URL: https://github.com/nodejs-private/node-private/pull/95
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/16511
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Add block scoping to test-assert-deep.js to reduce likelihood of one
test case having side effects that affect another test case.
PR-URL: https://github.com/nodejs/node/pull/16532
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Initializing IOCP on the same fd twice can fail on Windows.
Consequently, if the IPC channel uses fd 1 or 2 and the console is setup
first, writing to the IPC channel will fail.
PR-URL: https://github.com/nodejs/node/pull/16562
Fixes: https://github.com/nodejs/node/issues/16141
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/16220
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
PR-URL: https://github.com/nodejs/node/pull/16220
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Complete the migration to the new error system of _stream_readable
and _stream_writable. Adds the corresponding documentation.
PR-URL: https://github.com/nodejs/node/pull/16589
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
No longer check whether key is a symbol as Object.keys does not
return symbols. No longer convert key to string as it is always
a string. Validate that only one value is passed for each
pseudo-header.
Extend illegal connection header message to include the name of
the problematic header.
Extend tests to cover this behaviour.
PR-URL: https://github.com/nodejs/node/pull/16575
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
* correctly reset write timers: currently reset timers on
both session & stream when write starts and when it ends.
* prevent large writes from timing out: when writing a large
chunk of data in http2, once the data is handed off to C++,
the JS session & stream lose all track of the write and will
timeout if the write doesn't complete within the timeout window
Fix this issue by tracking whether a write request is ongoing and
also tracking how many chunks have been sent since the most recent
write started. (Since each write call resets the timer.)
PR-URL: https://github.com/nodejs/node/pull/16525
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
When CPU is busy, the above sequential case fails occasionally,
expand the timeout value to fix it.
PR-URL: https://github.com/nodejs/node/pull/16314
Fixes: https://github.com/nodejs/node/issues/16310
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
With this change, we do async stack tracking only when explicitly
requested by the inspector client. This avoids unnecessary overhead
for clients that might not be interested in async stack traces.
PR-URL: https://github.com/nodejs/node/pull/16308
Fixes: https://github.com/nodejs/node/issues/16180
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reduce the size of wrap objects by moving a couple of accessors from the
instance template to the prototype template. They occupied one slot per
instance instead of one slot per class.
This commit fixes some instances of unwrapping twice since that code had
to be updated anyway to use `args.This()` instead of `args.Holder()`.
PR-URL: https://github.com/nodejs/node/pull/16482
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Accessors implicitly run inside a HandleScope, UDPWrap::GetFD() doesn't
need to create one explicitly.
PR-URL: https://github.com/nodejs/node/pull/16482
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/16512
Refs: https://github.com/libuv/libuv/issues/1607
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Replace usage of common.fixturesDir with fixtures module in
test-https-agent-disable-session-reuse.js.
PR-URL: https://github.com/nodejs/node/pull/15901
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Create a minimal test for the util benchmark files.
PR-URL: https://github.com/nodejs/node/pull/16050
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
PR-URL: https://github.com/nodejs/node/pull/16507
Refs: https://github.com/nodejs/nodejs.org/pull/1425
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Should not be nested under the bullet point. Headings need to be at the
root level.
PR-URL: https://github.com/nodejs/node/pull/16507
Refs: https://github.com/nodejs/nodejs.org/pull/1425
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Specifically for the test-crypto-hash.js test file.
PR-URL: https://github.com/nodejs/node/pull/15996
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
PR-URL: https://github.com/nodejs/node/pull/16261
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
The reason is that absolute URLs do not go through extension and index
checks. By switching to an absolute path, the resolver still applies
extensions properly to the top-level main.
PR-URL: https://github.com/nodejs/node/pull/16526
Fixes: https://github.com/nodejs/node/issues/16476
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
It can be useful to load dependencies as part of the loader hook
definition file. This fixes a bug where `import x from 'x'` would
always return `x` as `undefined` if the import was made in a loader
hooks definition module.
A parallel change to the CJS loading injection process meant that the
CJS module wasn't being injected into the correct loader instance,
which is corrected here with a test.
PR-URL: https://github.com/nodejs/node/pull/16381
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
