posthog/plugin-server

PostHog Plugin Server

This service takes care of processing events with plugins and more.

Get started

Let's get you developing the plugin server in no time:

1. Have virtual environment from the main PostHog repo active.

2. Install dependencies and prepare for takeoff by running command yarn.

3. Start a development instance of PostHog - instructions here. After all, this is the PostHog Plugin Server, and it works in conjuction with the main server.

4. Make sure that the plugin server is configured correctly (see Configuration). The following settings need to be the same for the plugin server and the main server: DATABASE_URL, REDIS_URL, KAFKA_HOSTS, CLICKHOUSE_HOST, CLICKHOUSE_DATABASE, CLICKHOUSE_USER, and CLICKHOUSE_PASSWORD. Their default values should work just fine in local development though.

5. Start the plugin server in autoreload mode with yarn start:dev, or in compiled mode with yarn build && yarn start:dist, and develop away!

6. Prepare for running tests with yarn setup:test, which will run the necessary migrations. Run the tests themselves with yarn test:{1,2}.

CLI flags

There are also a few alternative utility options on how to boot plugin-server. Each one does a single thing. They are listed in the table below, in order of precedence.

Name	Description	CLI flags
Help	Show plugin server configuration options	-h, --help
Version	Only show currently running plugin server version	-v, --version
Healthcheck	Check plugin server health and exit with 0 or 1	--healthcheck
Migrate	Migrate Graphile job queue	--migrate

Alternative modes

By default, plugin-server is responsible for and executes all of the following:

1. Ingestion (calling plugins and writing event and person data to ClickHouse and Postgres, buffering events)
2. Scheduled tasks (runEveryX type plugin tasks)
3. Processing plugin jobs
4. Async plugin tasks (onEvent, onSnapshot plugin tasks)

Ingestion can be split into its own process at higher scales. To do so, you need to run two different instances of plugin-server, with the following environment variables set:

Env Var	Description
PLUGIN_SERVER_MODE=ingestion	This plugin server instance only runs ingestion (1)
PLUGIN_SERVER_MODE=async	This plugin server processes all async tasks (2-4). Note that async plugin tasks are triggered based on ClickHouse events topic

If PLUGIN_SERVER_MODE is not set the plugin server will execute all of its tasks (1-4).

Configuration

There's a multitude of settings you can use to control the plugin server. Use them as environment variables.

Name	Description	Default value
DATABASE_URL	Postgres database URL	'postgres://localhost:5432/posthog'
REDIS_URL	Redis store URL	'redis://localhost'
BASE_DIR	base path for resolving local plugins	'.'
WORKER_CONCURRENCY	number of concurrent worker threads	0 – all cores
TASKS_PER_WORKER	number of parallel tasks per worker thread	10
REDIS_POOL_MIN_SIZE	minimum number of Redis connections to use per thread	1
REDIS_POOL_MAX_SIZE	maximum number of Redis connections to use per thread	3
SCHEDULE_LOCK_TTL	how many seconds to hold the lock for the schedule	60
PLUGINS_RELOAD_PUBSUB_CHANNEL	Redis channel for reload events	'reload-plugins'
CLICKHOUSE_HOST	ClickHouse host	'localhost'
CLICKHOUSE_DATABASE	ClickHouse database	'default'
CLICKHOUSE_USER	ClickHouse username	'default'
CLICKHOUSE_PASSWORD	ClickHouse password	null
CLICKHOUSE_CA	ClickHouse CA certs	null
CLICKHOUSE_SECURE	whether to secure ClickHouse connection	false
KAFKA_HOSTS	comma-delimited Kafka hosts	null
KAFKA_CONSUMPTION_TOPIC	Kafka incoming events topic	'events_plugin_ingestion'
KAFKA_CLIENT_CERT_B64	Kafka certificate in Base64	null
KAFKA_CLIENT_CERT_KEY_B64	Kafka certificate key in Base64	null
KAFKA_TRUSTED_CERT_B64	Kafka trusted CA in Base64	null
KAFKA_PRODUCER_MAX_QUEUE_SIZE	Kafka producer batch max size before flushing	20
KAFKA_FLUSH_FREQUENCY_MS	Kafka producer batch max duration before flushing	500
KAFKA_MAX_MESSAGE_BATCH_SIZE	Kafka producer batch max size in bytes before flushing	900000
LOG_LEVEL	minimum log level	'info'
SENTRY_DSN	Sentry ingestion URL	null
STATSD_HOST	StatsD host - integration disabled if this is not provided	null
STATSD_PORT	StatsD port	8125
STATSD_PREFIX	StatsD prefix	'plugin-server.'
DISABLE_MMDB	whether to disable MMDB IP location capabilities	false
INTERNAL_MMDB_SERVER_PORT	port of the internal server used for IP location (0 means random)	0
DISTINCT_ID_LRU_SIZE	size of persons distinct ID LRU cache	10000
CAPTURE_INTERNAL_METRICS	whether to capture internal metrics for posthog in posthog	false
PISCINA_USE_ATOMICS	corresponds to the piscina useAtomics config option (https://github.com/piscinajs/piscina#constructor-new-piscinaoptions)	true
PISCINA_ATOMICS_TIMEOUT	(advanced) corresponds to the length of time (in ms) a piscina worker should block for when looking for tasks - instances with high volumes (100+ events/sec) might benefit from setting this to a lower value	5000
HEALTHCHECK_MAX_STALE_SECONDS	'maximum number of seconds the plugin server can go without ingesting events before the healthcheck fails'	7200
MAX_PENDING_PROMISES_PER_WORKER	(advanced) maximum number of promises that a worker can have running at once in the background. currently only targets the exportEvents buffer.	100
KAFKA_PARTITIONS_CONSUMED_CONCURRENTLY	(advanced) how many kafka partitions the plugin server should consume from concurrently	1
PLUGIN_SERVER_MODE	(advanced) see alternative modes section	null

Releasing a new version

Just bump up version in package.json on the main branch and the new version will be published automatically, with a matching PR in the main PostHog repo created.

It's advised to use bump patch/minor/major label on PRs - that way the above will be done automatically when the PR is merged.

Courtesy of GitHub Actions.

Walkthrough

The story begins with pluginServer.ts -> startPluginServer, which is the main thread of the plugin server.

This main thread spawns WORKER_CONCURRENCY worker threads, managed using Piscina. Each worker thread runs TASKS_PER_WORKER tasks (concurrentTasksPerWorker).

Main thread

Let's talk about the main thread first. This has:

1. pubSub – Redis powered pub-sub mechanism for reloading plugins whenever a message is published by the main PostHog app.

2. hub – Handler of connections to required DBs and queues (ClickHouse, Kafka, Postgres, Redis), holds loaded plugins. Created via hub.ts -> createHub. Every thread has its own instance.

3. piscina – Manager of tasks delegated to threads. makePiscina creates the manager, while createWorker creates the worker threads.

4. pluginScheduleControl – Controller of scheduled jobs. Responsible for adding Piscina tasks for scheduled jobs, when the time comes. The schedule information makes it into the controller when plugin VMs are created.

   Scheduled tasks are controlled with Redlock (redis-based distributed lock), and run on only one plugin server instance in the entire cluster.

5. jobQueueConsumer – The internal job queue consumer. This enables retries, scheduling jobs in the future (once) (Note: this is the difference between pluginScheduleControl and this internal jobQueue). While pluginScheduleControl is triggered via runEveryMinute, runEveryHour tasks, the jobQueueConsumer deals with meta.jobs.doX(event).runAt(new Date()).

   Jobs are enqueued by job-queue-manager.ts, which is backed by Postgres-based Graphile-worker (graphile-queue.ts).

6. queue – Event ingestion queue. This is a Celery (backed by Redis) or Kafka queue, depending on the setup (EE/Cloud is Kafka due to high volume). These are consumed by the queue above, and sent off to the Piscina workers (src/main/ingestion-queues/queue.ts -> ingestEvent). Since all of the actual ingestion happens inside worker threads, you'll find the specific ingestion code there (src/worker/ingestion/ingest-event.ts). There the data is saved into Postgres (and ClickHouse via Kafka on EE/Cloud).

   It's also a good idea to see the producer side of this ingestion queue, which comes from Posthog/posthog/api/capture.py. The plugin server gets the process_event_with_plugins Celery task from there, in the Postgres pipeline. The ClickHouse via Kafka pipeline gets the data by way of Kafka topic events_plugin_ingestion.

7. mmdbServer – TCP server, which works as an interface between the GeoIP MMDB data reader located in main thread memory and plugins ran in worker threads of the same plugin server instance. This way the GeoIP reader is only loaded in one thread and can be used in all. Additionally this mechanism ensures that mmdbServer is ready before ingestion is started (database downloaded from http-mmdb and read), and keeps the database up to date in the background.

Worker threads

This begins with worker.ts and createWorker().

hub is the same setup as in the main thread.

New functions called here are:

1. setupPlugins – Loads plugins and prepares them for lazy VM initialization.

2. createTaskRunner – Creates a Piscina task runner that allows to operate on plugin VMs.

Note: An organization_id is tied to a company and its installed plugins, a team_id is tied to a project and its plugin configs (enabled/disabled+extra config).

Questions?

Join our Slack community. 🦔