mirror of
https://github.com/nodejs/node.git
synced 2024-12-01 16:10:02 +01:00
ac2857b12c
The two main goals of this change are: - To make it easier to build the Intl option using ICU (particularly, using a newer ICU than v8/Chromium's version) - To enable a much smaller ICU build with only English support The goal here is to get node.js binaries built this way by default so that the Intl API can be used. Additional data can be added at execution time (see Readme and wiki) More details are at https://github.com/joyent/node/pull/7719 In particular, this change adds the "--with-intl=" configure option to provide more ways of building "Intl": - "full-icu" picks up an ICU from deps/icu - "small-icu" is similar, but builds only English - "system-icu" uses pkg-config to find an installed ICU - "none" does nothing (no Intl) For Windows builds, the "full-icu" or "small-icu" options are added to vcbuild.bat. Note that the existing "--with-icu-path" option is not removed from configure, but may not be used alongside the new option. Wiki changes have already been made on https://github.com/joyent/node/wiki/Installation and a new page created at https://github.com/joyent/node/wiki/Intl (marked as provisional until this change lands.) Summary of changes: * README.md : doc updates * .gitignore : added "deps/icu" as this is the location where ICU is unpacked to. * Makefile : added the tools/icu/* files to cpplint, but excluded a problematic file. * configure : added the "--with-intl" option mentioned above. Calculate at config time the list of ICU source files to use and data packaging options. * node.gyp : add the new files src/node_i18n.cc/.h as well as ICU linkage. * src/node.cc : add call into node::i18n::InitializeICUDirectory(icu_data_dir) as well as new --icu-data-dir option and NODE_ICU_DATA env variable to configure ICU data loading. This loading is only relevant in the "small" configuration. * src/node_i18n.cc : new source file for the above Initialize.. function, to setup ICU as needed. * tools/icu : new directory with some tools needed for this build. * tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new ways, both on unix/mac and windows. * tools/icu/icu-system.gyp : new .gyp file to build node against a pkg-config detected ICU. * tools/icu/icu_small.json : new config file for the "English-only" small build. * tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the above .json file. * tools/icu/iculslocs.cc : new tool for repairing ICU data manifests after trim operation. * tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker. * vcbuild.bat : added small-icu and full-icu options, to call into configure. * Fixed toolset dependencies, see https://github.com/joyent/node/pull/7719#issuecomment-54641687 Note that because of a bug in gyp {CC,CXX}_host must also be set. Otherwise gcc/g++ will be used by default for part of the build. Reviewed-by: Trevor Norris <trev.norris@gmail.com> Reviewed-by: Fedor Indutny <fedor@indutny.com>
246 lines
8.1 KiB
Batchfile
246 lines
8.1 KiB
Batchfile
@echo off
|
|
|
|
cd %~dp0
|
|
|
|
if /i "%1"=="help" goto help
|
|
if /i "%1"=="--help" goto help
|
|
if /i "%1"=="-help" goto help
|
|
if /i "%1"=="/help" goto help
|
|
if /i "%1"=="?" goto help
|
|
if /i "%1"=="-?" goto help
|
|
if /i "%1"=="--?" goto help
|
|
if /i "%1"=="/?" goto help
|
|
|
|
@rem Process arguments.
|
|
set config=Release
|
|
set msiplatform=x86
|
|
set target=Build
|
|
set target_arch=ia32
|
|
set debug_arg=
|
|
set nosnapshot_arg=
|
|
set noprojgen=
|
|
set nobuild=
|
|
set nosign=
|
|
set nosnapshot=
|
|
set test=
|
|
set test_args=
|
|
set msi=
|
|
set licensertf=
|
|
set upload=
|
|
set jslint=
|
|
set buildnodeweak=
|
|
set noetw=
|
|
set noetw_arg=
|
|
set noetw_msi_arg=
|
|
set noperfctr=
|
|
set noperfctr_arg=
|
|
set noperfctr_msi_arg=
|
|
set i18n_arg=
|
|
|
|
:next-arg
|
|
if "%1"=="" goto args-done
|
|
if /i "%1"=="debug" set config=Debug&goto arg-ok
|
|
if /i "%1"=="release" set config=Release&goto arg-ok
|
|
if /i "%1"=="clean" set target=Clean&goto arg-ok
|
|
if /i "%1"=="ia32" set target_arch=ia32&goto arg-ok
|
|
if /i "%1"=="x86" set target_arch=ia32&goto arg-ok
|
|
if /i "%1"=="x64" set target_arch=x64&goto arg-ok
|
|
if /i "%1"=="noprojgen" set noprojgen=1&goto arg-ok
|
|
if /i "%1"=="nobuild" set nobuild=1&goto arg-ok
|
|
if /i "%1"=="nosign" set nosign=1&goto arg-ok
|
|
if /i "%1"=="nosnapshot" set nosnapshot=1&goto arg-ok
|
|
if /i "%1"=="noetw" set noetw=1&goto arg-ok
|
|
if /i "%1"=="noperfctr" set noperfctr=1&goto arg-ok
|
|
if /i "%1"=="licensertf" set licensertf=1&goto arg-ok
|
|
if /i "%1"=="test-uv" set test=test-uv&goto arg-ok
|
|
if /i "%1"=="test-internet" set test=test-internet&goto arg-ok
|
|
if /i "%1"=="test-pummel" set test=test-pummel&goto arg-ok
|
|
if /i "%1"=="test-simple" set test=test-simple&goto arg-ok
|
|
if /i "%1"=="test-message" set test=test-message&goto arg-ok
|
|
if /i "%1"=="test-gc" set test=test-gc&set buildnodeweak=1&goto arg-ok
|
|
if /i "%1"=="test-all" set test=test-all&set buildnodeweak=1&goto arg-ok
|
|
if /i "%1"=="test" set test=test&goto arg-ok
|
|
if /i "%1"=="msi" set msi=1&set licensertf=1&goto arg-ok
|
|
if /i "%1"=="upload" set upload=1&goto arg-ok
|
|
if /i "%1"=="jslint" set jslint=1&goto arg-ok
|
|
if /i "%1"=="small-icu" set i18n_arg=%1&goto arg-ok
|
|
if /i "%1"=="full-icu" set i18n_arg=%1&goto arg-ok
|
|
|
|
echo Warning: ignoring invalid command line option `%1`.
|
|
|
|
:arg-ok
|
|
:arg-ok
|
|
shift
|
|
goto next-arg
|
|
|
|
:args-done
|
|
if defined upload goto upload
|
|
if defined jslint goto jslint
|
|
|
|
if "%config%"=="Debug" set debug_arg=--debug
|
|
if "%target_arch%"=="x64" set msiplatform=x64
|
|
if defined nosnapshot set nosnapshot_arg=--without-snapshot
|
|
if defined noetw set noetw_arg=--without-etw& set noetw_msi_arg=/p:NoETW=1
|
|
if defined noperfctr set noperfctr_arg=--without-perfctr& set noperfctr_msi_arg=/p:NoPerfCtr=1
|
|
|
|
if "%i18n_arg%"=="full-icu" set i18n_arg=--with-intl=full-icu
|
|
if "%i18n_arg%"=="small-icu" set i18n_arg=--with-intl=small-icu
|
|
|
|
:project-gen
|
|
@rem Skip project generation if requested.
|
|
if defined noprojgen goto msbuild
|
|
|
|
if defined NIGHTLY set TAG=nightly-%NIGHTLY%
|
|
|
|
@rem Generate the VS project.
|
|
SETLOCAL
|
|
if defined VS100COMNTOOLS call "%VS100COMNTOOLS%\VCVarsQueryRegistry.bat"
|
|
python configure %i18n_arg% %debug_arg% %nosnapshot_arg% %noetw_arg% %noperfctr_arg% --dest-cpu=%target_arch% --tag=%TAG%
|
|
if errorlevel 1 goto create-msvs-files-failed
|
|
if not exist node.sln goto create-msvs-files-failed
|
|
echo Project files generated.
|
|
ENDLOCAL
|
|
|
|
:msbuild
|
|
@rem Skip project generation if requested.
|
|
if defined nobuild goto sign
|
|
|
|
@rem Look for Visual Studio 2013
|
|
if not defined VS120COMNTOOLS goto vc-set-2012
|
|
if not exist "%VS120COMNTOOLS%\..\..\vc\vcvarsall.bat" goto vc-set-2012
|
|
call "%VS120COMNTOOLS%\..\..\vc\vcvarsall.bat"
|
|
if not defined VCINSTALLDIR goto msbuild-not-found
|
|
set GYP_MSVS_VERSION=2013
|
|
goto msbuild-found
|
|
|
|
:vc-set-2012
|
|
@rem Look for Visual Studio 2012
|
|
if not defined VS110COMNTOOLS goto vc-set-2010
|
|
if not exist "%VS110COMNTOOLS%\..\..\vc\vcvarsall.bat" goto vc-set-2010
|
|
call "%VS110COMNTOOLS%\..\..\vc\vcvarsall.bat"
|
|
if not defined VCINSTALLDIR goto msbuild-not-found
|
|
set GYP_MSVS_VERSION=2012
|
|
goto msbuild-found
|
|
|
|
:vc-set-2010
|
|
if not defined VS100COMNTOOLS goto msbuild-not-found
|
|
if not exist "%VS100COMNTOOLS%\..\..\vc\vcvarsall.bat" goto msbuild-not-found
|
|
call "%VS100COMNTOOLS%\..\..\vc\vcvarsall.bat"
|
|
if not defined VCINSTALLDIR goto msbuild-not-found
|
|
goto msbuild-found
|
|
|
|
:msbuild-not-found
|
|
echo Build skipped. To build, this file needs to run from VS cmd prompt.
|
|
goto run
|
|
|
|
:msbuild-found
|
|
@rem Build the sln with msbuild.
|
|
msbuild node.sln /m /t:%target% /p:Configuration=%config% /clp:NoSummary;NoItemAndPropertyList;Verbosity=minimal /nologo
|
|
if errorlevel 1 goto exit
|
|
|
|
:sign
|
|
@rem Skip signing if the `nosign` option was specified.
|
|
if defined nosign goto licensertf
|
|
|
|
signtool sign /a /d "Node.js" /t http://timestamp.globalsign.com/scripts/timestamp.dll Release\node.exe
|
|
if errorlevel 1 echo Failed to sign exe&goto exit
|
|
|
|
:licensertf
|
|
@rem Skip license.rtf generation if not requested.
|
|
if not defined licensertf goto msi
|
|
|
|
%config%\node tools\license2rtf.js < LICENSE > %config%\license.rtf
|
|
if errorlevel 1 echo Failed to generate license.rtf&goto exit
|
|
|
|
:msi
|
|
@rem Skip msi generation if not requested
|
|
if not defined msi goto run
|
|
call :getnodeversion
|
|
|
|
if not defined NIGHTLY goto msibuild
|
|
set NODE_VERSION=%NODE_VERSION%.%NIGHTLY%
|
|
|
|
:msibuild
|
|
echo Building node-%NODE_VERSION%
|
|
msbuild "%~dp0tools\msvs\msi\nodemsi.sln" /m /t:Clean,Build /p:Configuration=%config% /p:Platform=%msiplatform% /p:NodeVersion=%NODE_VERSION% %noetw_msi_arg% %noperfctr_msi_arg% /clp:NoSummary;NoItemAndPropertyList;Verbosity=minimal /nologo
|
|
if errorlevel 1 goto exit
|
|
|
|
if defined nosign goto run
|
|
signtool sign /a /d "Node.js" /t http://timestamp.globalsign.com/scripts/timestamp.dll Release\node-v%NODE_VERSION%-%msiplatform%.msi
|
|
if errorlevel 1 echo Failed to sign msi&goto exit
|
|
|
|
:run
|
|
@rem Run tests if requested.
|
|
if "%test%"=="" goto exit
|
|
|
|
if "%config%"=="Debug" set test_args=--mode=debug
|
|
if "%config%"=="Release" set test_args=--mode=release
|
|
|
|
if "%test%"=="test" set test_args=%test_args% simple message
|
|
if "%test%"=="test-internet" set test_args=%test_args% internet
|
|
if "%test%"=="test-pummel" set test_args=%test_args% pummel
|
|
if "%test%"=="test-simple" set test_args=%test_args% simple
|
|
if "%test%"=="test-message" set test_args=%test_args% message
|
|
if "%test%"=="test-gc" set test_args=%test_args% gc
|
|
if "%test%"=="test-all" set test_args=%test_args%
|
|
|
|
:build-node-weak
|
|
@rem Build node-weak if required
|
|
if "%buildnodeweak%"=="" goto run-tests
|
|
"%config%\node" deps\npm\node_modules\node-gyp\bin\node-gyp rebuild --directory="%~dp0test\gc\node_modules\weak" --nodedir="%~dp0."
|
|
if errorlevel 1 goto build-node-weak-failed
|
|
goto run-tests
|
|
|
|
:build-node-weak-failed
|
|
echo Failed to build node-weak.
|
|
goto exit
|
|
|
|
:run-tests
|
|
echo running 'python tools/test.py %test_args%'
|
|
python tools/test.py %test_args%
|
|
if "%test%"=="test" goto jslint
|
|
goto exit
|
|
|
|
:create-msvs-files-failed
|
|
echo Failed to create vc project files.
|
|
goto exit
|
|
|
|
:upload
|
|
echo uploading .exe .msi .pdb to nodejs.org
|
|
call :getnodeversion
|
|
@echo on
|
|
ssh node@nodejs.org mkdir -p web/nodejs.org/dist/v%NODE_VERSION%
|
|
scp Release\node.msi node@nodejs.org:~/web/nodejs.org/dist/v%NODE_VERSION%/node-v%NODE_VERSION%.msi
|
|
scp Release\node.exe node@nodejs.org:~/web/nodejs.org/dist/v%NODE_VERSION%/node.exe
|
|
scp Release\node.pdb node@nodejs.org:~/web/nodejs.org/dist/v%NODE_VERSION%/node.pdb
|
|
@echo off
|
|
goto exit
|
|
|
|
:jslint
|
|
echo running jslint
|
|
set PYTHONPATH=tools/closure_linter/
|
|
python tools/closure_linter/closure_linter/gjslint.py --unix_mode --strict --nojsdoc -r lib/ -r src/ --exclude_files lib/punycode.js
|
|
goto exit
|
|
|
|
:help
|
|
echo vcbuild.bat [debug/release] [msi] [test-all/test-uv/test-internet/test-pummel/test-simple/test-message] [clean] [noprojgen] [nobuild] [nosign] [x86/x64]
|
|
echo Examples:
|
|
echo vcbuild.bat : builds release build
|
|
echo vcbuild.bat debug : builds debug build
|
|
echo vcbuild.bat release msi : builds release build and MSI installer package
|
|
echo vcbuild.bat test : builds debug build and runs tests
|
|
goto exit
|
|
|
|
:exit
|
|
goto :EOF
|
|
|
|
rem ***************
|
|
rem Subroutines
|
|
rem ***************
|
|
|
|
:getnodeversion
|
|
set NODE_VERSION=
|
|
for /F "usebackq tokens=*" %%i in (`python "%~dp0tools\getnodeversion.py"`) do set NODE_VERSION=%%i
|
|
if not defined NODE_VERSION echo Cannot determine current version of node.js & exit /b 1
|
|
goto :EOF
|