mirrors/nodejs
mirrors/nodejs
0
0
Fork 0
mirror of https://github.com/nodejs/node.git synced 2024-11-29 15:06:33 +01:00
Code Issues Releases Activity
853f0bdf19
nodejs/doc/onboarding.md
Rich Trott e53275d819 doc: fix minor grammar/typographical issues in onboarding.md 
PR-URL: https://github.com/nodejs/node/pull/18847
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matheus Marchini <matheus@sthima.com>
2018-02-21 00:30:25 -08:00

12 KiB
Raw Blame History

Onboarding

This document is an outline of the things we tell new Collaborators at their onboarding session.

One week before the onboarding session

  • Confirm that the new Collaborator is using two-factor authentication on their GitHub account. Unless two-factor authentication is enabled, do not give an account elevated privileges such as the ability to land code in the main repository or to start continuous integration (CI) jobs.
  • Announce the accepted nomination in a TSC meeting and in the TSC mailing list.

Fifteen minutes before the onboarding session

  • Prior to the onboarding session, add the new Collaborator to the Collaborators team, and to the Members team if they are not already part of it. Note that this is the step that gives the account elevated privileges, so do not perform this step (or any subsequent steps) unless two-factor authentication is enabled on the new Collaborator's GitHub account.

Onboarding session

Local setup

  • git:

    • Make sure you have whitespace=fix: git config --global --add apply.whitespace fix
    • Always continue to PR from your own GitHub fork
      • Branches in the nodejs/node repository are only for release lines
    • See Updating Node.js from Upstream
    • Make a new branch for each PR you submit.
    • Membership: Consider making your membership in the Node.js GitHub organization public. This makes it easier to identify Collaborators. Instructions on how to do that are available at Publicizing or hiding organization membership.

  • Notifications:

    • Use https://github.com/notifications or set up email
    • Watching the main repo will flood your inbox (several hundred notifications on typical weekdays), so be prepared

  • #node-dev on webchat.freenode.net is the best place to interact with the TSC / other Collaborators

    • If there are any questions after the session, a good place to ask is there!
    • Presence is not mandatory, but please drop a note there if force-pushing to master

Project goals & values

  • Collaborators are the collective owners of the project

    • The project has the goals of its contributors

  • There are some higher-level goals and values

    • Empathy towards users matters (this is in part why we onboard people)
    • Generally: try to be nice to people!
    • The best outcome is for people who come to our issue tracker to feel like they can come back again.

  • You are expected to follow and hold others accountable to the Code of Conduct.

Managing the issue tracker

  • You have (mostly) free rein; don't hesitate to close an issue if you are confident that it should be closed

    • Be nice about closing issues! Let people know why, and that issues and PRs can be reopened if necessary

  • See "Labels"

    • There is a bot that applies subsystem labels (for example, doc, test, assert, or buffer) so that we know what parts of the code base the pull request modifies. It is not perfect, of course. Feel free to apply relevant labels and remove irrelevant labels from pull requests and issues.
    • Use the tsc-review label if a topic is controversial or isn't coming to a conclusion after an extended time.
    • semver-{minor,major}:
      • If a change has the remote chance of breaking something, use the semver-major label
      • When adding a semver-* label, add a comment explaining why you're adding it. Do it right away so you don't forget!

  • See "Who to CC in issues"

    • This will come more naturally over time
    • For many of the teams listed there, you can ask to be added if you are interested
      • Some are WGs with some process around adding people, others are only there for notifications

  • When a discussion gets heated, you can request that other Collaborators keep an eye on it by opening an issue at the private nodejs/moderation repository.

    • This is a repository to which all members of the nodejs GitHub organization (not just Collaborators on Node.js core) have access. Its contents should not be shared externally.
    • You can find the full moderation policy here.

Reviewing PRs

  • The primary goal is for the codebase to improve.

  • Secondary (but not far off) is for the person submitting code to succeed. A pull request from a new contributor is an opportunity to grow the community.

  • Review a bit at a time. Do not overwhelm new contributors.

    • It is tempting to micro-optimize. Don't succumb to that temptation. We change V8 often. Techniques that provide improved performance today may be unnecessary in the future.

  • Be aware: Your opinion carries a lot of weight!

  • Nits (requests for small changes that are not essential) are fine, but try to avoid stalling the pull request.

    • Note that they are nits when you comment: Nit: change foo() to bar().
    • If they are stalling the pull request, fix them yourself on merge.

  • Insofar as possible, issues should be identified by tools rather than human reviewers. If you are leaving comments about issues that could be identified by tools but are not, consider implementing the necessary tooling.

  • Minimum wait for comments time

    • There is a minimum waiting time which we try to respect for non-trivial changes so that people who may have important input in such a distributed project are able to respond.
    • For non-trivial changes, leave the pull request open for at least 48 hours (72 hours on a weekend).
    • If a pull request is abandoned, check if they'd mind if you took it over (especially if it just has nits left).

  • Approving a change

    • Collaborators indicate that they have reviewed and approve of the changes in a pull request using Github’s approval interface
    • Some people like to comment LGTM (“Looks Good To Me”)
    • You have the authority to approve any other collaborator’s work.
    • You cannot approve your own pull requests.
    • When explicitly using Changes requested, show empathy – comments will usually be addressed even if you don’t use it.
      • If you do, it is nice if you are available later to check whether your comments have been addressed
      • If you see that the requested changes have been made, you can clear another collaborator's Changes requested review.
      • Use Changes requested to indicate that you are considering some of your comments to block the PR from landing.

  • What belongs in Node.js:

    • Opinions vary – it’s good to have a broad collaborator base for that reason!
    • If Node.js itself needs it (due to historical reasons), then it belongs in Node.js.
      • That is to say, url is there because of http, freelist is there because of http, etc.
    • Things that cannot be done outside of core, or only with significant pain such as async_hooks.

  • Continuous Integration (CI) Testing:

    • https://ci.nodejs.org/
      • It is not automatically run. You need to start it manually.
    • Log in on CI is integrated with GitHub. Try to log in now!
    • You will be using node-test-pull-request most of the time. Go there now!
    • To get to the form to start a job, click on Build with Parameters. (If you don't see it, that probably means you are not logged in!) Click it now!
    • To start CI testing from this screen, you need to fill in two elements on the form:
      • The CERTIFY_SAFE box should be checked. By checking it, you are indicating that you have reviewed the code you are about to test and you are confident that it does not contain any malicious code. (We don't want people hijacking our CI hosts to attack other hosts on the internet, for example!)
      • The PR_ID box should be filled in with the number identifying the pull request containing the code you wish to test. For example, if the URL for the pull request is https://github.com/nodejs/node/issues/7006, then put 7006 in the PR_ID.
      • The remaining elements on the form are typically unchanged with the exception of POST_STATUS_TO_PR. Check that if you want a CI status indicator to be automatically inserted into the PR.
    • If you need help with something CI-related:
      • Use #node-dev (IRC) to talk to other Collaborators.
      • Use #node-build (IRC) to talk to the Build WG members who maintain the CI infrastructure.
      • Use the Build WG repo to file issues for the Build WG members who maintain the CI infrastructure.

Landing PRs

Exercise: Make a PR adding yourself to the README

  • Example: https://github.com/nodejs/node/commit/ce986de829457c39257cd205067602e765768fb0
    • For raw commit message: git log ce986de829457c39257cd205067602e765768fb0 -1
  • Collaborators are in alphabetical order by GitHub username.
  • Optionally, include your personal pronouns.
  • Label your pull request with the doc subsystem label.
  • Run CI on the PR. Because the PR does not affect any code, use the node-test-pull-request-lite CI task. Alternatively, use the usual node-test-pull-request CI task and cancel it after the linter and one other subtask have passed.
  • After one or two approvals, land the PR (PRs of this type do not need to wait for 48/72 hours to land).
    • Be sure to add the PR-URL: <full-pr-url> and appropriate Reviewed-By: metadata.
    • core-validate-commit automates the validation of commit messages.
    • node-core-utils automates the generation of metadata and the landing process. See the documentation of git-node.

Final notes