This is necessary to distinguish them from other data types.
PR-URL: https://github.com/nodejs/node/pull/25046
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Most people are going to use the existing option and switching the
name now comes with a cost which does not seem to justify the
improvement.
PR-URL: https://github.com/nodejs/node/pull/24982
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Currently it is not possible to inspect getters. To prevent any side
effects this should not become a default but under lots of
circumstances it would still be useful to inspect getters. This way
it is possible to actively opt into inspecting those.
PR-URL: https://github.com/nodejs/node/pull/24852
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This adds the `capitalized-comments` eslint rule to verify that
actual sentences use capital letters as starting letters. It ignores
special words and all lines below 62 characters.
PR-URL: https://github.com/nodejs/node/pull/24808
Reviewed-By: Sam Ruby <rubys@intertwingly.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This was missed when reverting a former commit. To make sure the
history is kept in place, this just adds a new entry to state the
revert.
PR-URL: https://github.com/nodejs/node/pull/24805
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
The `util.format()` behavior changed recently. Add the changes entry
to document the new BigInt behavior.
PR-URL: https://github.com/nodejs/node/pull/24758
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
The `console` functions rely on the `util.format()` behavior. It
did not follow the whatwg spec when it comes to symbols in combination
with the %d, %i and %f format specifiers. Using a symbol argument in
combination with one of these specifiers resulted in an error instead
of returning `'NaN'`. This is now fixed by this patch.
PR-URL: https://github.com/nodejs/node/pull/23708
Refs: https://console.spec.whatwg.org/#formatter
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This reverts commit ac7450a09a.
This fully reverts the changes to util.inspect depth.
It has caused breakage in logging to existing apps, and even
something as simple as `console.log(require)` will cause >1m freezes.
I've heard nothing but negative feedback (seriously not a single
person has expressed anything positive about this change) and
personally i find this change extremely annoying.
PR-URL: https://github.com/nodejs/node/pull/24326
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Two changes here which bring us closer to the console standard:
- Arguments to `util.format` are no longer formatted differently
depending on their order, with format strings being an exception.
- Format specifier formatting is now only triggered if the string
actually contains a format string.
Under the hood, we now use a single shared function to format the given
arguments which will make the code easier to read and modify.
PR-URL: https://github.com/nodejs/node/pull/23162
Fixes: https://github.com/nodejs/node/issues/23137
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Notable changes:
* assert
* The diff output is now a tiny bit improved by sorting object
properties when inspecting the values that are compared with each
other. https://github.com/nodejs/node/pull/22788
* cli
* The options parser now normalizes `_` to `-` in all multi-word
command-line flags, e.g. `--no_warnings` has the same effect as
`--no-warnings`. https://github.com/nodejs/node/pull/23020
* Added bash completion for the `node` binary. To generate a bash
completion script, run `node --completion-bash`. The output can be
saved to a file which can be sourced to enable completion.
https://github.com/nodejs/node/pull/20713
* crypto
* Added support for PEM-level encryption.
https://github.com/nodejs/node/pull/23151
* Added an API asymmetric key pair generation. The new methods
`crypto.generateKeyPair` and `crypto.generateKeyPairSync` can be
used to generate public and private key pairs. The API supports
RSA, DSA and EC and a variety of key encodings (both PEM and DER).
https://github.com/nodejs/node/pull/22660
* fs
* Added a `recursive` option to `fs.mkdir` and `fs.mkdirSync`. If
this option is set to true, non-existing parent folders will be
automatically created. https://github.com/nodejs/node/pull/21875
* http2
* Added a `'ping'` event to `Http2Session` that is emitted whenever a
non-ack `PING` is received.
https://github.com/nodejs/node/pull/23009
* Added support for the `ORIGIN` frame.
https://github.com/nodejs/node/pull/22956
* Updated nghttp2 to 1.34.0. This adds RFC 8441 extended connect
protocol support to allow use of WebSockets over HTTP/2.
https://github.com/nodejs/node/pull/23284
* module
* Added `module.createRequireFromPath(filename)`. This new method can
be used to create a custom require function that will resolve
modules relative to the filename path.
https://github.com/nodejs/node/pull/19360
* process
* Added a `'multipleResolves'` process event that is emitted whenever
a `Promise` is attempted to be resolved multiple times, e.g. if the
`resolve` and `reject` functions are both called in a `Promise`
executor. https://github.com/nodejs/node/pull/22218
* url
* Added `url.fileURLToPath(url)` and `url.pathToFileURL(path)`. These
methods can be used to correctly convert between file: URLs and
absolute paths. https://github.com/nodejs/node/pull/22506
* util
* Added the `sorted` option to `util.inspect()`. If set to `true`,
all properties of an object and Set and Map entries will be sorted
in the returned string. If set to a function, it is used as a
compare function. https://github.com/nodejs/node/pull/22788
* The `util.instpect.custom` symbol is now defined in the global
symbol registry as `Symbol.for('nodejs.util.inspect.custom')`.
https://github.com/nodejs/node/pull/20857
* Added support for `BigInt` numbers in `util.format()`.
https://github.com/nodejs/node/pull/22097
* V8 API
* A number of V8 C++ APIs have been marked as deprecated since they
have been removed in the upstream repository. Replacement APIs
are added where necessary. https://github.com/nodejs/node/pull/23159
* Windows
* The Windows msi installer now provides an option to automatically
install the tools required to build native modules.
https://github.com/nodejs/node/pull/22645
* Workers
* Debugging support for Workers using the DevTools protocol has been
implemented. https://github.com/nodejs/node/pull/21364
* The public `inspector` module is now enabled in Workers.
https://github.com/nodejs/node/pull/22769
* Added new collaborators:
* digitalinfinity - Hitesh Kanwathirtha
PR-URL: https://github.com/nodejs/node/pull/23313
`util.format` and `console.log` now support BigInt via the existing
format specifiers `%i` and `%d`.
PR-URL: https://github.com/nodejs/node/pull/22097
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
The current default is not ideal in most use cases. Therefore it is
changed to inspect objects to a maximum depth of 20 in case
util.inspect is called with it's defaults. The default is kept at 2
when using console.log() and similar in the repl.
PR-URL: https://github.com/nodejs/node/pull/17907
Refs: https://github.com/nodejs/node/issues/12693
PR-URL: https://github.com/nodejs/node/pull/22846
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Denys Otrishko <shishugi@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
In V8 7.0, the array sorting algorithm was changed to Timsort, which
is stable. A compare function returning only `true` or `false`
(converted to 0 and 1) cannot work properly.
PR-URL: https://github.com/nodejs/node/pull/22992
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Kyle Farnung <kfarnung@microsoft.com>
The order option can be used to sort the inspected values in case
they do not rely on their order as arrays. That way the output is
stable no matter of the object property inspection order.
PR-URL: https://github.com/nodejs/node/pull/22788
Refs: https://github.com/nodejs/node/issues/22763
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
The maximum hard limit that `util.inspect()` could theoretically handle
is the maximum string size. That is ~2 ** 28 on 32 bit systems and
~2 ** 30 on 64 bit systems.
Due to the recursive algorithm a complex object could easily exceed
that limit without throwing an error right away and therefore
crashing the application by exceeding the heap limit.
`util.inspect()` is fast enough to compute 128 MB of data below one
second on an Intel(R) Core(TM) i7-5600U CPU. This hard limit allows
to inspect arbitrary big objects from now on without crashing the
application or blocking the event loop significantly.
PR-URL: https://github.com/nodejs/node/pull/22756
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Checking all boxed primitives individually requires to cross the C++
barrier multiple times besides being more complicated than just a
single check.
PR-URL: https://github.com/nodejs/node/pull/22620
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: John-David Dalton <john.david.dalton@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Some nits were also fixed in passing.
PR-URL: https://github.com/nodejs/node/pull/22537
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
v8 6.8 supports all removed flags. For example for BigInt.
PR-URL: https://github.com/nodejs/node/pull/22285
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/21782
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Replace some redirected URLs with the final ones.
PR-URL: https://github.com/nodejs/node/pull/21811
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Jon Moss <me@jonathanmoss.me>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Using util.inspect should still return values in case the maximum
call stack size is reached. This is important to inspect linked
lists and similar.
PR-URL: https://github.com/nodejs/node/pull/20725
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Anatoli Papirovski <apapirovski@mac.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Change instances of `foo has been deprecated` to `foo is deprecated` and
similar.
PR-URL: https://github.com/nodejs/node/pull/21136
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
This reverts commit b994b8eff6.
This caused regressions in ecosystem code. While the change originally
was semver-major and could be postponed until after Node.js 10,
I think reverting it is a good choice at this point.
Also, I personally do not think defaulting to a shallow inspect
is a bad thing at all – quite the opposite: It makes `util.inspect()`
give an overview of an object, rather than providing a full
display of its contents. Changing the `depth` default to infinity
fundamentally changed the role that `util.inspect()` plays,
and makes output much more verbose and thus at times unusable
for `console.log()`-style debugging.
PR-URL: https://github.com/nodejs/node/pull/20017
Fixes: https://github.com/nodejs/node/issues/19405
Refs: https://github.com/nodejs/node/pull/17907
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
These methods are exposed, even though the BigInt64Array and
BigUint64Array types are currently behind the --harmony-bigint
command line flag.
PR-URL: https://github.com/nodejs/node/pull/20615
Fixes: https://github.com/nodejs/node/issues/20602
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Tiancheng "Timothy" Gu <timothygu99@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Some other formatting nits were fixed
and some superfluous descriptions were simplified in passing.
PR-URL: https://github.com/nodejs/node/pull/20401
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
* Assert
* Calling `assert.fail()` with more than one argument is deprecated. #70dcacd710
* Calling `assert.ok()` with no arguments will now throw. #3cd7977a42
* Calling `assert.ifError()` will now throw with any argument other than `undefined` or `null`. Previously the method would throw with any truthy value. #e65a6e81ef
* The `assert.rejects()` and `assert.doesNotReject()` methods have been added for working with async functions. #599337f43e
* Async_hooks
* Older experimental async_hooks APIs have been removed. #1cc6b993b9
* Buffer
* Uses of `new Buffer()` and `Buffer()` outside of the `node_modules` directory will now emit a runtime deprecation warning. #9d4ab90117
* `Buffer.isEncoding()` now returns `undefined` for falsy values, including an empty string. #452eed956e
* `Buffer.fill()` will throw if an attempt is made to fill with an empty `Buffer`. #1e802539b2
* Child Process
* Undefined properties of env are ignored. #38ee25e2e2, #85739b6c5b
* Console
* The `console.table()` method has been added. #97ace04492
* Crypto
* The `crypto.createCipher()` and `crypto.createDecipher()` methods have been deprecated. Please use `crypto.createCipheriv()` and `crypto.createDecipheriv()` instead. #81f88e30dd
* The `decipher.finaltol()` method has been deprecated. #19f3927d92
* The `crypto.DEFAULT_ENCODING` property has been deprecated. #6035beea93
* The `ECDH.convertKey()` method has been added. #f2e02883e7
* The `crypto.fips` property has been deprecated. #6e7992e8b8
* Dependencies
* V8 has been updated to 6.6. #9daebb48d6
* OpenSSL has been updated to 1.1.0h. #66cb29e646
* EventEmitter
* The `EventEmitter.prototype.off()` method has been added as an alias for `EventEmitter.prototype.removeListener()`. #3bb6f07d52
* File System
* The `fs.promises` API provides experimental promisified versions of the `fs` functions. #329fc78e49
* Invalid path errors are now thrown synchronously. #d8f73385e2
* The `fs.readFile()` method now partitions reads to avoid thread pool exhaustion. #67a4ce1c6e
* HTTP
* Processing of HTTP Status codes `100`, `102-199` has been improved. #baf8495078
* Multi-byte characters in URL paths are now forbidden. #b961d9fd83
* N-API
* The n-api is no longer experimental. #cd7d7b15c1
* Net
* The `'close'` event will be emitted after `'end'`. #9b7a6914a7
* Perf_hooks
* The `PerformanceObserver` class is now an `AsyncResource` and can be monitored using `async_hooks`. #009e41826f
* Trace events are now emitted for performance events. #9e509b622b
* The `performance` API has been simplified. #2ec6995555
* Performance milestone marks will be emitted as trace events. #96cb4fb795
* Process
* Using non-string values for `process.env` is deprecated. #5826fe4e79
* The `process.assert()` method is deprecated. #703e37cf3f
* REPL
* REPL now experimentally supports top-level await when using the `--experimental-repl-await` flag. #eeab7bc068
* The previously deprecated "magic mode" has been removed. #4893f70d12
* The previously deprecated `NODE_REPL_HISTORY_FILE` environment variable has been removed. #60c9ad7979
* Proxy objects are shown as Proxy objects when inspected. #90a43906ab
* Streams
* The `'readable'` event is now always deferred with nextTick. #1e0f3315c7
* A new `pipeline()` method has been provided for building end-to-data stream pipelines. #a5cf3feaf1
* Experimental support for async for-await has been added to `stream.Readable`. #61b4d60c5d
* Timers
* The `enroll()` and `unenroll()` methods have been deprecated. #68783ae0b8
* TLS
* The `tls.convertNONProtocols()` method has been deprecated. #9204a0db6e
* Support for NPN (next protocol negotiation) has been dropped. #5bfbe5ceae
* The `ecdhCurve` default is now `'auto'`. #af78840b19
* Trace Events
* A new `trace_events` top-level module allows trace event categories to be enabled/disabld at runtime. #da5d818a54
* URL
* The WHATWG URL API is now a global. #312414662b
* Util
* `util.types.is[…]` type checks have been added. #b20af8088a
* Support for bigint formatting has been added to `util.inspect()`. #39dc947409
Add a way to tell `Console` instances to either always use, never use
or auto-detect color support and inspect objects accordingly.
PR-URL: https://github.com/nodejs/node/pull/19372
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Identical to `format()` except that it takes an options argument
that is passed through to `inspect()`.
PR-URL: https://github.com/nodejs/node/pull/19372
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/19915
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
