Adds the ability to `import` or `require` a package from within its
own source code. This allows tests and examples to be written using
the package name, making them easier to reuse by consumers of the
package.
Assuming the `name` field in `package.json` is set to `my-pkg`, its
test could use `require('my-pkg')` or `import 'my-pkg'` even if
there's no `node_modules/my-pkg` while testing the package itself.
An important difference between this and relative specifiers like
`require('../')` is that self-references use the public interface
of the package as defined in the `exports` field while relative
specifiers don't.
This behavior is guarded by a new experimental flag
(`--experimental-resolve-self`).
PR-URL: https://github.com/nodejs/node/pull/29327
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
document the fact that --enable-source-maps and prepareStackTrace are
incompatible, see #29994
PR-URL: https://github.com/nodejs/node/pull/30046
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Also eliminate some redundancy.
PR-URL: https://github.com/nodejs/node/pull/30038
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Notable changes:
* assert:
* If the validation function passed to `assert.throws()` or
`assert.rejects()` returns a value other than `true`, an assertion
error will be thrown instead of the original error to highlight the
programming mistake (Ruben Bridgewater).
https://github.com/nodejs/node/pull/28263
* If a constructor function is passed to validate the instance of
errors thrown in `assert.throws()` or `assert.reject()`, an
assertion error will be thrown instead of the original error
(Ruben Bridgewater).
https://github.com/nodejs/node/pull/28263
* build:
* Node.js releases are now built with default full-icu support. This
means that all locales supported by ICU are now included and
Intl-related APIs may return different values than before
(Richard Lau).
https://github.com/nodejs/node/pull/29887
* The minimum Xcode version supported for macOS was increased to 10.
It is still possible to build Node.js with Xcode 8 but this may no
longer be the case in a future v13.x release (Michael Dawson).
https://github.com/nodejs/node/pull/29622
* child_process:
* `ChildProcess._channel` (DEP0129) is now a Runtime deprecation
(cjihrig).
https://github.com/nodejs/node/pull/27949
* console:
* The output `console.timeEnd()` and `console.timeLog()` will now
automatically select a suitable time unit instead of always using
milliseconds (Xavier Stouder).
https://github.com/nodejs/node/pull/29251
* deps:
* The V8 engine was updated to version 7.8. This includes performance
improvements to object destructuring, memory usage and WebAssembly
startup time (Myles Borins).
https://github.com/nodejs/node/pull/29694)
* domain:
* The domain's error handler is now executed with the active domain
set to the domain's parent to prevent inner recursion
(Julien Gilli).
https://github.com/nodejs/node/pull/26211
* fs:
* The undocumented method `FSWatcher.prototype.start()` was removed
(Lucas Holmquist).
https://github.com/nodejs/node/pull/29905
* Calling the `open()` method on a `ReadStream` or `WriteStream` now
emits a runtime deprecation warning. The methods are supposed to be
internal and should not be called by user code (Robert Nagy).
https://github.com/nodejs/node/pull/29061
* `fs.read/write`, `fs.readSync/writeSync` and `fd.read/write` now
accept any safe integer as their `offset` parameter. The value of
`offset` is also no longer coerced, so a valid type must be passed
to the functions (Zach Bjornson).
https://github.com/nodejs/node/pull/26572
* http:
* Aborted requests no longer emit the `end` or `error` events after
`aborted` (Robert Nagy).
https://github.com/nodejs/node/pull/27984https://github.com/nodejs/node/pull/20077
* Data will no longer be emitted after a socket error (Robert Nagy).
https://github.com/nodejs/node/pull/28711
* The legacy HTTP parser (previously available under the
`--http-parser=legacy` flag) was removed (Anna Henningsen).
https://github.com/nodejs/node/pull/29589
* The `host` option for HTTP requests is now validated to be a string
value (Giorgos Ntemiris).
https://github.com/nodejs/node/pull/29568
* The `request.connection` and `response.connection` properties are now
runtime deprecated. The equivalent `request.socket` and `response.socket`
should be used instead (Robert Nagy).
https://github.com/nodejs/node/pull/29015
* http, http2:
* The default server timeout was removed (Ali Ijaz Sheikh).
https://github.com/nodejs/node/pull/27558
* Brought 425 status code name into accordance with RFC 8470. The name
changed from "Unordered Collection" to "Too Early" (Sergei Osipov).
https://github.com/nodejs/node/pull/29880
* lib:
* The `error.errno` property will now always be a number. To get the
string value, use `error.code` instead (Joyee Cheung).
https://github.com/nodejs/node/pull/28140
* module:
* `module.createRequireFromPath()` is deprecated. Use
`module.createRequire()` instead (cjihrig).
https://github.com/nodejs/node/pull/27951
* src:
* Changing the value of `process.env.TZ` will now clear the tz cache.
This affects the default time zone used by methods such as
`Date.prototype.toString` (Ben Noordhuis).
https://github.com/nodejs/node/pull/20026
* stream:
* The timing and behavior of streams was consolidated for a number of
edge cases. Please look at the individual commits below for more
information.
PR-URL: https://github.com/nodejs/node/pull/29504
Add a flag that makes Node.js print the stack trace at the
time of *throwing* uncaught exceptions, rather than at the
creation of the `Error` object, if there is any.
This is disabled by default because it affects GC behavior.
PR-URL: https://github.com/nodejs/node/pull/30025
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Without the line lengths of in-memory transpiled source, it's not
possible to convert from byte ofsets to line/column offsets.
PR-URL: https://github.com/nodejs/node/pull/29863
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/29564
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Renames the `--loader` cli argument to `--experimental-loader`. This is
to clearly indicate the esm loader feature as experimental even after
esm is no longer experimental.
Also minorly alters the `--experimental-loader` docs to say that the
passed loader can be an esm module.
Refs: https://github.com/nodejs/modules/issues/351#issuecomment-535189524
PR-URL: https://github.com/nodejs/node/pull/29752
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove the legacy `http_parser` implementation as a dependency
and all code that uses it in favor of llhttp, given that the latter
has been the default for all of Node 12 with no outstanding issues.
PR-URL: https://github.com/nodejs/node/pull/29589
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Convert to asterisks when there are mixed styles in document.
Addresses Markdownlint MD004 rule
PR-URL: https://github.com/nodejs/node/pull/29516
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/27744
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
This is used to allow people to run polyfills.
Co-Authored-By: Anna Henningsen <github@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/28940
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
It's nice to have usage examples, especially since the flag requires the
`SIG` version of the signal name, unlike `kill`.
PR-URL: https://github.com/nodejs/node/pull/28754
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Add a test that checks that the documented allowed options for the
`NODE_OPTIONS` environment variable are consistent with the actually
allowed options.
PR-URL: https://github.com/nodejs/node/pull/28179
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Add missing options to the list of allowed options for the
`NODE_OPTIONS` environment variable. Sort the list alphabetically.
PR-URL: https://github.com/nodejs/node/pull/28179
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit add the --tls-min and --tls-max command line options to the
list of allowed options for the NODE_OPTIONS environment variable.
PR-URL: https://github.com/nodejs/node/pull/28146
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
This makes sure the "good" and "bad" examples are split into two.
Otherwise it'll result in an parse error.
PR-URL: https://github.com/nodejs/node/pull/27670
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Refael Ackermann (רפאל פלחי) <refack@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: Ujjwal Sharma <usharma1998@gmail.com>
Notable changes:
* doc:
* The JSON variant of the API documentation is no longer experimental
(Rich Trott) https://github.com/nodejs/node/pull/27842.
* esm:
* JSON module support is always enabled under
`--experimental-modules`. The `--experimental-json-modules` flag
has been removed (Myles Borins)
https://github.com/nodejs/node/pull/27752.
* http,http2:
* A new flag has been added for overriding the default HTTP server
socket timeout (which is two minutes). Pass
`--http-server-default-timeout=milliseconds`
or `--http-server-default-timeout=0` to respectively change or
disable the timeout. Starting with Node.js 13.0.0, the timeout will
be disabled by default
(Ali Ijaz Sheikh) https://github.com/nodejs/node/pull/27704.
* inspector:
* Added an experimental `--heap-prof` flag to start the V8 heap
profiler on startup and write the heap profile to disk before exit
(Joyee Cheung) https://github.com/nodejs/node/pull/27596.
* stream:
* The `readable.unshift()` method now correctly converts strings to
buffers. Additionally, a new optional argument is accepted to
specify the string's encoding, such as `'utf8'` or `'ascii'`
(Marcos Casagrande) https://github.com/nodejs/node/pull/27194.
* v8:
* The object returned by `v8.getHeapStatistics()` has two new
properties: `number_of_native_contexts` and
`number_of_detached_contexts` (Yuriy Vasiyarov)
https://github.com/nodejs/node/pull/27933.
PR-URL: https://github.com/nodejs/node/pull/28040
This flag specifies how inspector websocket url should be reported.
Tthre options are supported:
- stderr - reports websocket as a message to stderr,
- http - exposes /json/list endpoint that contains inspector websocket
url,
- binding - require('inspector').url().
Related discussion: https://github.com/nodejs/diagnostics/issues/303
PR-URL: https://github.com/nodejs/node/pull/27741
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
In addition implements --heap-prof-name, --heap-prof-dir and
--heap-prof-interval.
These flags are similar to --cpu-prof flags but they are meant
for the V8 sampling heap profiler instead of the CPU profiler.
PR-URL: https://github.com/nodejs/node/pull/27596
Fixes: https://github.com/nodejs/node/issues/27421
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The HTML spec has officially landed JSON Modules and as such I think
we can move them out of the "experimental" status. They will still
be behind the `--experimental-modules` flag until the entire esm
implementation moves out of experimental.
Refs: https://html.spec.whatwg.org/#creating-a-json-module-script
PR-URL: https://github.com/nodejs/node/pull/27752
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Bradley Farias <bradley.meck@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Notable changes:
* deps:
* Updated llhttp to 1.1.3. This fixes a bug that made Node.js' HTTP
parser refuse any request URL that contained the "|" (vertical bar)
character. https://github.com/nodejs/node/pull/27595
* tls:
* Added an `enableTrace()` method to `TLSSocket` and an `enableTrace`
option to `tls.createServer()`. When enabled, TSL packet trace
information is written to `stderr`. This can be used to debug TLS
connection problems. https://github.com/nodejs/node/pull/27497https://github.com/nodejs/node/pull/27376
* cli:
* Added a `--trace-tls` command-line flag that enables tracing of TLS
connections without the need to modify existing application code.
https://github.com/nodejs/node/pull/27497
* Added a `--cpu-prof-interval` command-line flag. It can be used to
specify the sampling interval for the CPU profiles generated by
`--cpu-prof`. https://github.com/nodejs/node/pull/27535
* module:
* Added the `createRequire()` method. It allows to create a require
function from a file URL object, a file URL string or an absolute
path string. The existing `createRequireFromPath()` method is now
deprecated https://github.com/nodejs/node/pull/27405.
* Throw on `require('./path.mjs')`. This is technically a breaking
change that should have landed with Node.js 12.0.0. It is necessary
to have this to keep the possibility for a future minor version to
load ES Modules with the require function.
https://github.com/nodejs/node/pull/27417
* repl:
* The REPL now supports multi-line statements using `BigInt` literals
as well as public and private class fields and methods.
https://github.com/nodejs/node/pull/27400
* The REPL now supports tab autocompletion of file paths with `fs`
methods. https://github.com/nodejs/node/pull/26648
* meta:
* Added Christian Clauss (https://github.com/cclauss) to
collaborators. https://github.com/nodejs/node/pull/27554
PR-URL: https://github.com/nodejs/node/pull/27578
This patch implements --cpu-prof-interval to specify the sampling
interval of the CPU profiler started by --cpu-prof from the command
line. Also adjust the interval to 100 in test-cpu-prof.js to make
the test less flaky - it would fail if the time taken to finish
the workload is smaller than the sampling interval, which was
more likely on powerful machines when the interval was 1000.
PR-URL: https://github.com/nodejs/node/pull/27535
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This commit adds a --trace-tls command-line flag. The
purpose is to enable tracing of TLS connections without the
need to modify existing application code.
PR-URL: https://github.com/nodejs/node/pull/27497
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
To improve the integration of `--cpu-prof` with workers, this patch
splits `--cpu-prof-path` into `--cpu-prof-dir` and `--cpu-prof-name`,
so when a worker is launched from a thread that enables
`--cpu-prof`, if the parent thread sets `--cpu-prof-dir`, then the
profile of both thread would be generated to the specified directory.
If they end up specifying the same `--cpu-prof-name` the behavior
is undefined the last profile will overwritten the first one.
PR-URL: https://github.com/nodejs/node/pull/27306
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
In the code base the word `report` is almost only used to refer to
the diagnostic report when it's a noun, and it's programmable
interface `process.report()` it not prefixed, so `report` should be
unambiguous enough to use without `diagnostic`.
PR-URL: https://github.com/nodejs/node/pull/27312
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This patch introduces a CLI flag --cpu-prof that starts the V8
CPU profiler on start up, and ends the profiler then writes the
CPU profile before the Node.js instance (on the main thread or
the worker thread) exits. By default the profile is written to
`${cwd}/CPU.${yyyymmdd}.${hhmmss}.${pid}.${tid}.${seq}.cpuprofile`.
The patch also introduces a --cpu-prof-path flag for the user
to specify the path the profile will be written to.
Refs: https://github.com/nodejs/node/issues/26878
PR-URL: https://github.com/nodejs/node/pull/27147
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The characters specified within NODE_OPTIONS can now be escaped, which
is handy especially in conjunction with `--require` (where the file path
might happen to contain spaces that shouldn't cause the option to be
split into two).
Fixes: https://github.com/nodejs/node/issues/12971
PR-URL: https://github.com/nodejs/node/pull/24065
Reviewed-By: Anna Henningsen <anna@addaleax.net>
New flag is for string input only
PR-URL: https://github.com/nodejs/node/pull/27184
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
This adds a flag to define the default behavior for unhandled
rejections. Three modes exist: `none`, `warn` and `strict`. The first
is going to silence all unhandled rejection warnings. The second
behaves identical to the current default with the excetion that no
deprecation warning will be printed and the last is going to throw
an error for each unhandled rejection, just as regular exceptions do.
It is possible to intercept those with the `uncaughtException` hook
as with all other exceptions as well.
This PR has no influence on the existing `unhandledRejection` hook.
If that is used, it will continue to function as before.
PR-URL: https://github.com/nodejs/node/pull/26599
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Matheus Marchini <mat@mmarchini.me>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This flag allows heap snapshots to be captured without
modifying application code.
PR-URL: https://github.com/nodejs/node/pull/27133
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
