Compiles and executes source code in V8's debugger context. Provides
a programmatic way to get access to the debug object by executing:
var Debug = vm.runInDebugContext('Debug');
Fixes #7886.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
The behavior of the `node_modules` lookup algorithm was
changed in #1177, but the documentation was not updated completely
to describe the new behavior.
The pseudocode of the lookup algorithm did not metion that
`index.json` is tried to be loaded if you require a folder.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Allow cluster workers to listen on exclusive ports for TCP and UDP,
instead of forcing all calls to go through the cluster master.
Fixes: #3856
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
Currently, cluster workers can be removed from the workers list in three
different places:
- In the exit event handler for the worker process.
- In the disconnect event handler of the worker process.
- In the disconnect event handler of the cluster master.
However, handles for a given worker are cleaned up only in one of these
places: in the cluster master's disconnect event handler.
Because these events happen asynchronously, it is possible that the
workers list is empty before we even clean up one handle. This makes
the assert that makes sure that no handle is left when the workers
list is empty fail.
This commit removes the worker from the cluster.workers list only when
the worker is dead _and_ disconnected, at which point we're sure that
its associated handles are cleaned up.
Fixes #8191 and #8192.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
In case of an invalid DH parameter file, it is sliently discarded. To
use auto DH parameter in a server and DHE key length check in a
client, we need to wait for the next release of OpenSSL-1.0.2.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
net Sockets were calling read(0) to start reading, without
checking to see if they were paused first. This would result
in paused Socket objects keeping the event loop alive.
Fixes #8200
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Currently the address resolution family defaults to IPv4. Instead remove
the preference and instead resolve to a family suitable for the host.
Expose the getaddrinfo flags and allow them to be passed.
Add documentation about new flags.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Documentation claimed it accepted a single label argument, as time and
timeEnd do, which was incorrect.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Emits on every call to cluster.setupMaster(), even if no new settings
are given. This is because calling cluster.setupMaster() without
arguments (or with an empty options object) results in the settings
being restored to their defaults.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Only attributes of 'cluster.settings' will be modified after the first
call, leaving all other cluster initialization alone. Each call that
includes a 'settings' argument triggers a 'setup' event to be emitted.
Instead of each call resetting all values to their defaults, use the
current settings (if any) as the default. This retains setupMaster's
support how cluster.fork() uses setupMaster() to ensure
cluster.settings has been populated.
Update example in docs to use current node coding style and include
an example of progressive configuration.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Documentation for console.assert incorrectly described message as a
single message, but it is a format.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Instrumentation code might need to find out the entry point of the
process in a global context.
Documenting the existing process.mainModule to officially support this.
Fixes #7808
Signed-off-by: Fedor Indutny <fedor@indutny.com>
It's possible to construct a typed array from a buffer but the buffer
is treated as an array, not a byte array as one might expect.
Fixes #7786.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
This features comes from the need of adding extra options when displaying
the object using console.dir().
console.dir() accepts now a second parameter that is passed to util.inspect()
in order to provide extra options to the output. These options are: depth, color
and showHidden. More information about these options in util.inspect() documentation.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Slashes should be documented, because 3rd-party protocols -- those
postfixed with `://` -- would incorrectly `format` and `parse` if they
didn't set/get the `slashes` option.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Not all querystring are utf-8 encoding, make querystring can be used
to encode / decode `non-utf8` encoding string if necessary.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Adds a section to the transform stream docs to clarify the
difference between the `end` event and the `finish` events.
Also clarifies the wording on the `end` event.
When close() is called on a non-listening server, a synchronous
error is thrown. This commit causes the error to be passed to
the asynchronous callback function instead.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
A recent change to v8's API now makes it impossible to memcpy to a
v8::ArrayBuffer without causing it to be externalized. This means that
the garbage collector will not automatically free the memory when the
object is collected.
When/If the necessary API is included to allow the above
Buffer#toArrayBuffer() will be reintroduced.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
This commit introduces `readableObjectMode` and
`writableObjectMode` options for Duplex streams.
This can be used mostly to make parsers and
serializers with Transform streams.
Also the docs section about stream state objects
is removed, because it is not relevant anymore.
The example from the section is remade to show
new options.
fixes #6284
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
compare() works like String.localeCompare such that:
Buffer.compare(a, b) === a.compare(b);
equals() does a native check to see if two buffers are equal.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Forcibly flushes the request headers. You need this with long-lived
HTTP connections where the first data isn't written until the connection
has been established (think: tunneling requests over HTTP CONNECT.)
Fixes #7296.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
In tls.connect a unix socket connection to a path may be made in
recent versions of node by specifying the value for the path
property.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Introduce new signature for both `dgram.createSocket` method and
`dgram.Socket` constructor:
dgram.createSocket(options, [listener])
Options should contain `type` property and may contain `reuseAddr`
property. When `reuseAddr` is `true` - SO_REUSEADDR will be issued on
socket on bind.
fix #7415
Signed-off-by: Fedor Indutny <fedor@indutny.com>
This prevents segfaults when a native method is reassigned to a
different object (which corrupts args.This()). When unwrapping,
clients should use args.Holder() instead of args.This().
Closes #6690.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Move `createCredentials` to `tls` module and rename it to
`createSecureContext`. Make it use default values from `tls` module:
`DEFAULT_CIPHERS` and `DEFAULT_ECDH_CURVE`.
fix #7249
The `Agent#request()` function was removed in
f3189ace6b, so don't
use it in the documentation example. The function
wasn't documented in the first place.
V8 was upgraded from 3.22 to 3.24 in commit 1c7bf24. Upgrade source
files in test/addons/ and automatically generated tests from
doc/api/addons.markdown to the new V8 API.
This coincidentally fixes a bug in src/node_object_wrap.h where it was
still using the old V8 weak persistent handle interface, which is gone
in 3.24.
Expose localPort for binding to a specific port for outbound
connections.
If localAddress is not specified '0.0.0.0' is used for ip4 and '::'
for ip6 connections.
Fixes #7092
This implements the user-facing APIs that lets one run a child process
and block until it exits.
Logic shared with the async counterpart of each function was refactored
to enable code reuse.
Docs and tests are included.
The AsyncListener API has been moved into the "tracing" module in order
to keep the process object free from unnecessary clutter.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Make the HMAC digest method configurable. Update crypto.pbkdf2() and
crypto.pbkdf2Sync() to take an extra, optional digest argument.
Before this commit, SHA-1 (admittedly the most common method) was used
exclusively.
Fixes #6553.
Before this commit, verification exceptions had err.message set to the
OpenSSL error code (e.g. 'UNABLE_TO_VERIFY_LEAF_SIGNATURE').
This commit moves the error code to err.code and replaces err.message
with a human-readable error. Example:
// before
{
message: 'UNABLE_TO_VERIFY_LEAF_SIGNATURE'
}
// after
{
code: 'UNABLE_TO_VERIFY_LEAF_SIGNATURE',
message: 'unable to verify the first certificate'
}
UNABLE_TO_VERIFY_LEAF_SIGNATURE is a good example of why you want this:
the error code suggests that it's the last certificate that fails to
validate while it's actually the first certificate in the chain.
Going by the number of mailing list posts and StackOverflow questions,
it's a source of confusion to many people.
spawn stdio options can be a 'stream', but the following code
fails with "Incorrect value for stdio stream: [object Object]",
despite being a stream. The problem is the test isn't really
for a stream, its for an object with a numeric `.fd` property,
and streams do not have an fd until their async 'open' event
has occurred. This is reasonable, but was not documented.
child_process.spawn('date', [], {stdio: [
'ignore',
fs.createWriteStream('out.txt',{flags:'a'}),
'ignore']})
There was a flaw in the old API that has been fixed. Now the
asyncListener callback is now the "create" object property in the
callback object, and is optional.
The fact that the "exit" event passes the exit code as an argument
as omitted from the documentation. This adds the explanation and
augments the example code to show that.
The UNIX domain is also known as the LOCAL domain (AF_LOCAL), and
node/libuv implements it on Windows using named pipes. The API
documentation did not describe the naming rules for named pipes, and
also repeatedly described `listen(path)` as being UNIX, which it is not
on Windows.
Closes #6743
This adds two new member functions getAuthTag and setAuthTag that
are useful for AES-GCM encryption modes. Use getAuthTag after
Cipheriv.final, transmit the tag along with the data and use
Decipheriv.setAuthTag to have the encrypted data verified.
The null signal test existed, but only tested the case where the target
process existed, not when it did not exist.
Also clarified that SIGUSR1 is reserved by Node.js only for receiveing,
its not at all reserved when sending a signal with kill().
kill(pid, 'O_RDWR'), or any other node constant, "worked". I fixed this
by also checking for 'SIG'. The same as done in the isSignal() function.
Now the signal names supported by process.kill() are the same as those
supported by process.on().
Add a 'serialNumber' property to the object that is returned by
tls.CryptoStream#getPeerCertificate(). Contains the certificate's
serial number encoded as a hex string. The format is identical to
`openssl x509 -serial -in path/to/certificate`.
Fixes #6583.
As discussed on the mailing list: the module will not go away but the
API will continue to receive updates as the need arises.
Link: https://groups.google.com/forum/#!topic/nodejs/uqyTcQfimAI
Message-ID: <7384b30e-b64c-4086-b78f-b5acca9842a9@googlegroups.com>
Currently fs.watch does not have an option to specify if a directory
should be recursively watched for events across all subdirectories.
Several file watcher APIs support this. FSEvents on OS X > 10.5 is
one example. libuv has added support for FSEvents, but fs.watch had
no way to specify that a recursive watch was required.
fs.watch now has an additional boolean option 'recursive'. When set
to true, and when supported, fs.watch will return notifications for
the entire directory tree hierarchy rooted at the specified path.
Previous behaviour was to drop to an openssl prompt
("Enter PEM pass phrase:") when supplying a private key with a
passphrase. This change adds a fourth, optional, paramter that
will be used as the passphrase.
To include this parameter in a backwards compatible way it was
necessary to expose the previously undocumented (and unexposed)
feature of being able to explitly setting the output encoding.
- fixed some incomprehensible wording ("event assigned to..."?)
- removed undocumented and unnecessary process properties from example
- corrected the docs on the default for the exec setting
- described when workers are removed from cluster.workers
- described addressType, which was documented as existing, but not what
values it might have
- spell out more clearly the limitations of setupMaster
- describe disconnect in sufficient detail that why a child does or does
not exit can be understood
- clarify which cluster functions and events are available on process or
just on the worker, as well as which are not available in children,
- don't describe events as the same, when they have receive different
arguments
- fix misleading disconnect example: since disconnect already calls
close on all servers, doing it again in the example is a no-op, not
the "force close" it was claimed to be
- document the error event, not catching it will kill your node
- describe suicide better, it is important, and a bit unintuitive
(process.exit() is not suicide?)
- use worker consistently throughout, instead of child.
- Make explicit that .disconnected is set before the disconnect event,
and it is not allowed to send messages after calling .disconnect(),
even while waiting for a delayed disconect event.
- Remove obsolete claim that explicit exit is required
- Describe silent: in the options for fork()
- Describe .connected as the property it is, not just as an aside in
the disconnect() method
A follow-up commit will save the domain name on the request object but
we can't call that property 'domain' because that gets intercepted by
src/node.cc and lib/domain.js to implement the node.js feature of the
same name.
To avoid confusion, rename all variables called 'domain' to 'hostname'.
Add a short explanation of what the load average is and why it's
unavailable on Windows.
Also sneak in a fix for a typo that I introduced in commit 56c5806.
* Extend examples to show how to handle non-constructor invocation in
constructor callback functions.
* Fix up examples to initialize member variables at object construction.
* Fix up a few naming inconsistencies.
Fixes #5701.
Since it is Unix tradition to use exit code 1 for general-purpose script
bail-out, and the way of doing that in Node is to throw an exception and
not catch it, it makes the most sense to exit with 1 when an exception
goes uncaught.
Move the `Invalid Argument` exit to 9, so that it's something specific,
and clear that it's a node internal error.
Also, document the exit codes that we use.
