Interpretation of escape sequences with echo is not as consistent
across platforms as printf, so use the latter instead.
PR-URL: https://github.com/nodejs/node/pull/11466
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Remove the explicit dependency on $(NODE_EXE), it always triggers a
rebuild due to it being a .PHONY rule. Add-ons in test/addons/ have
the same implicit dependency so it isn't completely without precedent.
PR-URL: https://github.com/nodejs/node/pull/11311
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This just adds an additional make target (`make test-node-inspect`) but
will not include the new debugger in releases.
PR-URL: https://github.com/nodejs/node/pull/10187
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Replace node-weak with a small hand-rolled add-on. We can now drop
node-weak and nan, reducing the size of the source tree by about 750 kB
and the size of the tarball by about 150-300 kB.
PR-URL: https://github.com/nodejs/node/pull/11239
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Sometimes, after a cluster or debug test fails, a fixture hangs around
and holds onto a needed port, causing subsequent CI runs to fail. This
adds a command I've been running manually when this occurs. The command
will clear the stalled jobs before a CI run.
PR-URL: https://github.com/nodejs/node/pull/11246
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Josh Gavant <josh.gavant@outlook.com>
Adds Google Analytics tracking script to all doc pages when
`DOCS_ANALYTICS` is set when running `make`:
```bash
$ DOCS_ANALYTICS=<GOOGLE ANALYTICS ID> make
```
By default (when `DOCS_ANALYTICS` is not set), no tracking scripts are
included.
It respects "Do Not Track" settings end users might have in their
browser.
Also changes make target `doc-upload` from depending on the
`$(TARBALL)` target, to only depend on `doc` directly.
PR-URL: https://github.com/nodejs/node/pull/6601
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Currently when running make node_g the following error is displayed:
if [ ! -r node -o ! -L ]; then ln -fs out/Debug/node node_g; fi
/bin/sh: line 0: [: argument expected
It looks like there was a typo for the NODE_EXE where node became
lowercase instead of uppercase.
Ref: https://github.com/nodejs/node/pull/9827
PR-URL: https://github.com/nodejs/node/pull/10153
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Italo A. Casas <me@italoacasas.com>
The node -> out/*/node symlink is getting recreated in parallel with
other targets in the makefile which require it (e.g. test-ci) and
this seems to be causing a race condition which is showing up on AIX
Fixes: https://github.com/nodejs/node/issues/9825
PR-URL: https://github.com/nodejs/node/pull/9827
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-by: Michael Dawson <michael_dawson@ca.ibm.com>
Enable cpplint for files in test/cctest. Fix up the style issues it
reports.
PR-URL: https://github.com/nodejs/node/pull/9787
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
1. As it is, it just tries to build only the `all.html` file. If none of
the other files are built already, generated page will not be good.
To fix this, we process the assets and generate HTML files first.
2. After the HTML is generated, `google-chrome` is used to open the
generated file in browser. This is not very portable as it might not
be installed or installations might have used a different name. So,
we use Python's webbrowser module to open the file.
PR-URL: https://github.com/nodejs/node/pull/9436
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
The tick-processor tests are inherently non-deterministic. They
therefore have false negatives from time to time. They also
sometimes leave extra processes running.
Move them to their own directory until these issues are sorted. Note
that this means that the tests will not be run in CI. Like the inspector
tests and other tests, they will have to be run manually when they are
wanted.
PR-URL: https://github.com/nodejs/node/pull/9506
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Matthew Loring <mattloring@google.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Currently, when building the addons the following warning is displayed:
make[2]: warning: jobserver unavailable: using -j1. Add `+' to parent
make rule.
Adding the MAKEFLAGS="-j1" to avoid the warning.
Also updated the log message to say that it is building the addon and
not running the test as I think that is more accurate.
PR-URL: https://github.com/nodejs/node/pull/9450
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
As the comments are indented in Makefile, they are actually echoed
on the screen. This patch makes sure that the comments actually start
at the beginning of the line, and so not echoed and ignored.
PR-URL: https://github.com/nodejs/node/pull/9375
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
As it is, node-gyp produces a lot of build related verbose messages.
Latest node-gyp upgrade allows us to specify --silent flag to suppress
those messages. Except for CI, addons build will run silently.
PR-URL: https://github.com/nodejs/node/pull/8990
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
The config.gypi target has a recipe that uses the control function error
to report if the config.gypi file is missing or if it is stale (the
configure file was updated which is a prerequisite of this rule).
GNU make has two phases, immediate and deferred. During the first phase
it will expand any variables or functions as the makefile is parsed.
The recipe in this case is a shell if statement, which is a deferred
construct. But the control function $(error) is an immediate construct
which will cause the makefile processing to stop during the first phase
of the Make process.
If I understand this correctly the only possible outcome of this rule is
the "Stale config.gypi, please re-run ./configure" message which will
be done in the first phase and then exit. The shell condition will not
be considered. So it will never report that the config.gypi is missing.
bnoordhuis suggested that we simply change this into a single error
message:
"Missing or stale config.gypi, please run configure"
PR-URL: https://github.com/nodejs/node/pull/9053
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Make the `test/addons/.buildstamp` file dependent on
`src/node_version.h` since addons need to be re-compiled after
`NODE_MODULE_VERSION` bumps, e.g. as it happened recently
in b5bdff876b.
PR-URL: https://github.com/nodejs/node/pull/8861
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Enable the cctests on the CI now that they know how to write TAP output.
PR-URL: https://github.com/nodejs/node/pull/8034
Reviewed-By: James M Snell <jasnell@gmail.com>
There is a file in there required to build V8. The rest is being ignored
by V8's .gitignore anyway.
PR-URL: https://github.com/nodejs/node/pull/8317
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
The location of various gypfiles has changed in V8 5.2.
PR-URL: https://github.com/nodejs/node/pull/8317
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Run `npm install` before building the documentation from release
tarballs. The doctool currently depends on `js-yaml`, which
is imported from the `tools/eslint` subtree; however, release
tarballs don’t contain that directory.
Running `npm install` is clearly not a beautiful solution,
but it works.
Fixes: https://github.com/nodejs/node/issues/7872
PR-URL: https://github.com/nodejs/node/pull/8413
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
This test executes a simple debug session over the inspector protocol.
PR-URL: https://github.com/nodejs/node/pull/8429
Reviewed-By: ofrobots - Ali Ijaz Sheikh <ofrobots@google.com>
Opt-out `nightly` and `next-nightly` from the documentation
requirement since these docs aren't meant to be published.
This fixes our nightly jobs in CI.
PR-URL: https://github.com/nodejs/node/pull/8325
Fixes: https://github.com/nodejs/build/issues/478
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This adds support for multiple HTTP benchmarkers. Adds autocannon
as the secondary benchmarker.
PR-URL: https://github.com/nodejs/node/pull/8140
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/8296
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Addon tests were still starting to run before the node exp file
creation was complete.
- remove process_outputs_as_sources as it did not fix the
problem
- update create_expfile.sh so that exp file is created in a
temporary file and then renamed to final name so that
file is only visible once it is complete
- update target used in building Addons so that for
AIX it depends on the exp file being available
PR-URL: https://github.com/nodejs/node/pull/8285
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
There are no JavaScript files in the `src` directory. It can be
safely omitted from the JavaScript linting step.
PR-URL: https://github.com/nodejs/node/pull/8128
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/7999
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Currently the build-addons target is called as part of the
test target, and it has test/addons/.buildstamp as a dependency.
When running ./configure --debug and later switching/
updating branches you can be in a situation where the config.gypi
files in the addons build directories are using an incorrect
value for default_configuration. Currently this can happen and you
will get test errors as there are a few test that depend on the
value of default_configuration to be Release.
Ben Noordhuis provided the solution for this by adding a dependency to
config.gypi, which is generated when running ./configure, and will
correct this situation.
This commit is related to #7860. Please see the dicussion in that
issue regarding the test using hard-coded paths.
PR-URL: https://github.com/nodejs/node/pull/7893
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
It wasn't obviouse that common.js was the main cli tool.
PR-URL: https://github.com/nodejs/node/pull/7094
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
These files are very old and undocumented. Most likely nobody are
using them.
PR-URL: https://github.com/nodejs/node/pull/7094
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Extend linting to tools/license2rtf.js and any other JS that gets added
to the `tools` directory by default.
This incidentally simplifies lint invocation.
PR-URL: https://github.com/nodejs/node/pull/7647
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Fix a `s/addon/addons/` typo in the Makefile.
PR-URL: https://github.com/nodejs/node/pull/7542
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Some CI jobs compile Node and run the tests on different machines.
This change enables collaborators to have finer control over what runs
on these jobs, such as the exact suites to run. The test-ci rule was
split into js and native, to allow for addons to be compiled only on
the machines that are going to run them.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
PR-URL: https://github.com/nodejs/node/pull/7317
Currently we do not specific an absolute path for the tap output of the
V8 test suite. This is proving to be unreliable across release lines.
By prepending `$(PWD)` to each path we can guarantee it will always be
in the root folder.
PR-URL: https://github.com/nodejs/node/pull/7460
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
A missing 'break' statement unintentionally allowed "linary"
and "luffer" as alternatives for "binary" and "buffer".
Regression introduced in commit 54cc7212 ("buffer: introduce latin1
encoding term".)
PR-URL: https://github.com/nodejs/node/pull/7262
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
The prerequisite for rebuilding was on the binding.gyp file but the
actual sources.
PR-URL: https://github.com/nodejs/node/pull/7262
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Add a `REPLACEME` tag that should be used when introducing
docs for new features, so that they can be updated when releases
are made.
Ref: https://github.com/nodejs/node/issues/6578
PR-URL: https://github.com/nodejs/node/pull/6864
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
After the #3888 it was not possible to "make doc-only"
in some situations. This now fallsback to any installed
node version and throws "node not found" in error case.
Ref: https://github.com/nodejs/node/pull/3888
PR-URL: https://github.com/nodejs/node/pull/6906
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
We can tell when `node-gyp` is changed by creating a prerequisite on
`deps/npm/node_modules/node-gyp/package.json`. The prerequisite is added
to the `test/addons/.buildstamp` since `build-addons` is .PHONY.
Testing for this change was entirely manual.
$ make clean test-build # Initial build
$ make test-build # Make sure build-addons doesn't rebuild
$ touch deps/npm/node_modules/node-gyp/package.json # simulate change
$ make test-build # Ensure build-addons rebuilds
PR-URL: https://github.com/nodejs/node/pull/6787
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The current makefile runs both `cctest` and `build-addons` in parallel
under the assumption that both rely on `all`. Unfortunately
`build-addons` does not rely on all, and there is an edge case where
by it is possible to call `build-addons` while compilation is still
happening.
This patch takes the simplest route by forcing `build-addons` and
`cctest` to run in sequence like the other test targets. This ensures
that `build-addons` will never be run during compilation.
It would be possible to modify `build-addons` to rely on `all` but it
would be a much more aggressive change to the MAKEFILE for a fairly
minor perf bump, as cctest is so fast.
PR-URL: https://github.com/nodejs/node/pull/6723
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
`make binary` attempts to auto detect DESTCPU if not set, but was
assuming being on an Intel architecture.
PR-URL: https://github.com/nodejs/node/pull/6310
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
node-gyp rebuild should use the same python interpreter as in Makefile
rather than let node-gyp guess the python path by itself.
PR-URL: https://github.com/nodejs/node/pull/6646
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Allows building just docs using existing Node instead of building Node
first.
PR-URL: https://github.com/nodejs/node/pull/3888
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
* Make the 'extract embedded addons in the documentations' step a normal
prerequisite. As an order-only prerequisite, it's sometimes skipped
when it shouldn't be.
* Make `tools/doc/addon-verify.js` a dependency of that step. Changes
to that file should result in a rebuild.
PR-URL: https://github.com/nodejs/node/pull/6652
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Add `known_issues` tests to `make test` and `make test-ci` targets and
their equivalents on Windows.
PR-URL: https://github.com/nodejs/node/pull/6559
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Otherwise it's too easy to miss breaking changes to node.h and other
public headers until the CI catches them. `vcbuild test` tests addons
so there is precedence.
PR-URL: https://github.com/nodejs/node/pull/6232
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Instead of invoking jslint/cpplint from the test target,
call on the generic lint instead since it checks if eslint
exists. Since our tarballs lacks eslint we now get a more graceful
exit from `make test` instead of a traceback from jslint.
PR-URL: https://github.com/nodejs/node/pull/6406
Fixes: https://github.com/nodejs/node/issues/6408
Reviewed-By: Ryan Graham <r.m.graham@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
* Test the toHTML function in html.js. Check that given valid markdown
it produces the expected html. One test case will prevent regressions
of #5873.
* Check that when given valid markdown toJSON produces valid JSON with
the expected schema.
* Add doctool to the list of built in tests so it runs in CI.
PR-URL: https://github.com/nodejs/node/pull/6031
Fixes: https://github.com/nodejs/node/issues/5955
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Rich Trott <rtrott@gmail.com>
As it is, check-install.sh does not show more helpful error messages,
and supporting various shells could be a problem. This patch rewrites
the same in Python.
This patch also enables check-imports.py in the linting process
PR-URL: https://github.com/nodejs/node/pull/6105
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
* doc: rename .markdown references in content
* doc: rename to .md in tools
* doc: rename to .md in CONTRIBUTING.md
PR-URL: https://github.com/nodejs/node/pull/4747
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: techjeffharris
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The tar-headers target tries to find and delete links in the
tar folder, which fails as no links are found. Use rm -f to
avoid this.
Remove the config.gypi dependency, as the target runs configure
itself.
PR-URL: https://github.com/nodejs/node/pull/5978
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Run tests in parallel if the environment variable JOBS
(which should contain a number of parallel jobs) is set.
PR-URL: https://github.com/nodejs/node/pull/6208
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This commit switches from the eslint command-line tool to a custom
tool that uses eslint programmatically in order to perform linting
in parallel and to display linting results incrementally instead of
buffering them until the end.
Fixes: https://github.com/nodejs/node/issues/5596
PR-URL: https://github.com/nodejs/node/pull/5638
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Introduce two new targets we will populate with actions
once merged into all branches we need to support through CI.
PR-URL: https://github.com/nodejs/node/pull/5921
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Changes to Node core in order to allow compilation for linuxOne.
The ../archs/linux32-s390x/opensslconf.h and
../archs/linux64-s390x/opensslconf.h were automatically
generated by running make linux-ppc linux-ppc64 in the
deps/openssl/config directory as per our standard
practice
After these changes we still need a version of v8
which supports linuxOne but that will be coming soon
in the 5.1 version of v8. Until then with these changes
we'll be able to create a hybrid build which pulls in
v8 from the http://github/andrewlow repo.
PR-URL: https://github.com/nodejs/node/pull/5941
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This removes the ability to run linting from the source tarball,
rationale being that developers should use a git clone instead.
Also, fix the path of removing artifacts from the openssl dependency
since it now lives in `deps/openssl/openssl/`.
Tarballs shrink with ~10%.
PR-URL: https://github.com/nodejs/node/pull/5695
Fixes: https://github.com/nodejs/node/issues/5618
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: thefourtheye <thechargingvolcano@gmail.com>
Reviewed-By: James Snell <jasnell@gmail.com>
This reverts commit d9f7a597e4.
Changes here probably need wider discussion so revert the change until
that can happen.
PR-URL: https://github.com/nodejs/node/pull/5602
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This commit adds a known_issues directory to the test directory
for scripts that reproduce known bugs. Since these scripts are
expected to fail, it also adds a --expect-fail flag to test.py
which reports tests as successful when they fail.
Refs: https://github.com/nodejs/testing/issues/18
PR-URL: https://github.com/nodejs/node/pull/5528
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Wyatt Preul <wpreul@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/5517
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
All eslint rules are configured to report as errors. Remove useless
--quiet flag from eslint invocation in Makefile and vcbuild.bat.
PR-URL: https://github.com/nodejs/node/pull/5519
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Have `make test` run linting tools before tests rather than after. Lint
is likely to find issues quickly. Tests may take a while to run. So do
the linting first.
Refs: https://github.com/nodejs/node/issues/4546#issuecomment-189755007
PR-URL: https://github.com/nodejs/node/pull/5470
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Ported by exinfinitum from a PR by jasnell:
see https://github.com/nodejs/node-v0.x-archive/pull/14185
Allows the running of v8 tests on node's packaged v8 source code.
Note that the limited win32 support added by jasnell has NOT been ported,
and so these tests are currently UNIX ONLY.
Note that gclient depot tools
(see https://commondatastorage.googleapis.com/
chrome-infra-docs/flat/depot_tools/docs/html/
depot_tools_tutorial.html#_setting_up) and subversion are required
to run tests.
To perform tests, run the following commands:
make v8 DESTCPU=(ARCH)
make test-v8 DESTCPU=(ARCH)
where (ARCH) is your CPU architecture, e.g. x64, ia32.
DESTCPU MUST be specified for this to work properly.
Can also do tests on debug build by using "make test-v8 DESTCPU=(ARCH)
BUILDTYPE=Debug", or perform intl or benchmark tests via make
test-v8-intl or test-v8-benchmarks respectively.
Note that by default, quickcheck and TAP output are disabled, and i18n
is enabled. To activate these options, use options"QUICKCHECK=True" and
"ENABLE_V8_TAP=True" respectively.
Use "DISABLE_V8_I18N" to disable i18n.
Use V8_BUILD_OPTIONS to allow custom user-defined flags to be
appended onto "make v8".
Any tests performed after changes to the packaged v8 file will require
recompiling of v8, which can be done using "make v8 DESTCPU=(ARCH)".
Finally, two additional files necessary for one of the v8 tests have
been added to the v8 folder.
PR-URL: https://github.com/nodejs/node/pull/4704
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: targos - Michaël Zasso <mic.besace@gmail.com>
Apply eslint rules to `tools/doc`.
PR-URL: https://github.com/nodejs/node/pull/4973
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Added ability to dgram.send to send multiple buffers, _writev style.
The offset and length parameters in dgram.send are now optional.
Refactored the dgram benchmarks, and seperated them from net.
Added docs for the new signature.
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Fixes: https://github.com/nodejs/node/issues/4302
PR-URL: https://github.com/nodejs/node/pull/4374
If the VARIATION variable is present, then make binary will produce archives
named node-$(FULLVERSION)-$(PLATFORM)-$(ARCH)-$(VARIATION).
PR-URL: https://github.com/nodejs/node/pull/4631
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
instead of doc-*
PR-URL: https://github.com/nodejs/node/pull/4412
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
The no-reserved-keys rule doesn't exist anymore and we don't need ES3
compatibility.
escape and unescape are now known by eslint.
--reset flag was removed and it is now the default behavior.
PR-URL: https://github.com/nodejs/io.js/pull/2286
Reviewed-By: Roman Reiss <me@silverwind.io>
The `util.format()` is used frequently, make the method faster
is better.
R-URL: https://github.com/nodejs/node/pull/3964
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Prevent OpenSSL's fipsld from being used to link native modules
because this requires the original OpenSSL source to be
available after Node's installation.
Fixes: https://github.com/nodejs/node/issues/3815
PR-URL: https://github.com/nodejs/node/pull/4023
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Shigeki Ohtsu <ohtsu@iij.ad.jp>
* ICU 56 was just released yesterday. Update to it.
* Notable changes: Unicode 8, CLDR 28, 2-3x number format perf,
20% improvement in Collator startup
* more at http://site.icu-project.org/download/56 or in #2917
Also:
* cleanup out/**/*.d and deps/icu on "make clean"
* cleanup deps/icu on "vcbuild clean"
When building from an non-clean directory, it's important to
run `make clean` or `vcbuild clean` to remove the existing
ICU 55 from the deps path before building.
Fixes: https://github.com/nodejs/node/issues/2917
PR-URL: https://github.com/nodejs/node/pull/3281
Reviewed-By: James M Snell <jasnell@gmail.com>
Apply our eslint rules to the code for our custom eslint rules.
Eslint Inception! Maybe. I never saw that movie...
PR-URL: https://github.com/nodejs/node/pull/3195
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
Make `make clean` cleanup the generated tap file as well.
Fixes: #2834
PR-URL: #2837
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Alexis Campailla <orangemocha@nodejs.org>
new server has "nodejs" and "iojs" directories, upload to the
appropriate one
PR-URL: https://github.com/nodejs/node/pull/2623
Reviewed-By: jbergstroem - Johan Bergström <bugs@bergstroem.nu>
PR-URL: https://github.com/nodejs/node/pull/2424
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Adding support for specifying flaky test mode to
the test runner:
- via an environment variable FLAKY_TESTS for Makefile
- via an argument ignore-flaky for vcbuild.bat
Ported from 2d2494cf14
PR-URL: https://github.com/nodejs/node/pull/2424
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Make `make test-addons` part of the `make test-ci` target.
Use order-only prerequisites to make generating and building the add-ons
concurrency-safe when $JOBS > 1 and fudge the dependency on $(NODE_EXE)
so that add-ons are only rebuilt when needed instead of all the time.
PR-URL: https://github.com/nodejs/node/pull/2428
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Rod Vagg <rod@vagg.org>
This commit replaces instances of io.js with Node.js, based on the
recent convergence. There are some remaining instances of io.js,
related to build and the installer.
Fixes: https://github.com/nodejs/node/issues/2361
PR-URL: https://github.com/nodejs/node/pull/2367
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: João Reis <reis@janeasystems.com>
Add files in test/addon to the `make cpplint` rule and fix up existing
style issues. Tests scraped from doc/api/addon.md are filtered out
because those are predominantly for illustrative purposes.
PR-URL: https://github.com/nodejs/node/pull/2427
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
These are the core changes that allow pLinux BE/LE compile. They
don't include all of the changes needed for AIX which will follow
once we have pLinux up and running in the builds
PR-URL: https://github.com/nodejs/io.js/pull/2124
Reviewed-By: Ben Noordhuis <ben@strongloop.com>
Reviewed-By: Johan Bergstrom <bugs@bergstroem.nu>
Defaults to /usr/local otherwise, which isn't helpful for node-gyp,
nor standard assumptions about how header directories should be
structured.
PR-URL: https://github.com/nodejs/io.js/pull/2082
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Adding a single rule to be called from Jenkins.
Jenkins jobs typically call:
python ./configure
make -j $(getconf _NPROCESSORS_ONLN)
make test-ci
After this change, we can have Jenkins call:
make run-ci -j $(getconf _NPROCESSORS_ONLN)
This allows us to customize how we call configure
for different repos or branches (e.g. joyent\node).
PR-URL: https://github.com/nodejs/io.js/pull/2134
Reviewed-By: Ryan Graham <r.m.graham@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
to replace the full src download by node-gyp, using the proper format
instead of the full source format
PR-URL: https://github.com/nodejs/io.js/pull/1975
Reviewed-By: William Blankenship <william.jblankenship@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Since we will run linting before compiling or testing there's no
need to run it as part of the ci testing.
PR-URL: https://github.com/nodejs/io.js/pull/1965
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Revewied-By: Evan Lucas <evanlucas@me.com>
Since we aleady have a variable with path to the newly built
binary, use that instead of prefixing path. This also allows us
to pass a different path through the environment (NODE=)
PR-URL: https://github.com/nodejs/io.js/pull/1955
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rod Vagg <rod@vagg.org>
Enables the following rules:
- no-undef: Valuable rule to error on usage of undefined variables
- require-buffer: Custom rule that forbids usage of the global Buffer
inside lib/ because of REPL issues.
PR-URL: https://github.com/nodejs/io.js/pull/1794
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Enable linting for the test directory. A number of changes was made so
all tests conform the current rules used by lib and src directories. The
only exception for tests is that unreachable (dead) code is allowed.
test-fs-non-number-arguments-throw had to be excluded from the changes
because of a weird issue on Windows CI.
PR-URL: https://github.com/nodejs/io.js/pull/1721
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The old pattern didn't include files in lib/internal. This changes the
pattern to directories which makes eslint apply to all subdirectories as
well.
PR-URL: https://github.com/iojs/io.js/pull/1686
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Extracts test-npm from Makefile and puts it in tools/test-npm.sh
Also improves test-npm to use a separate copy of deps/npm for testing.
PR-URL: https://github.com/iojs/io.js/pull/1662
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Evan Lucas <evanlucas@me.com>
On machines with limited resources a fair tradeoff could be trading
result size with less memory and cpu consumption. Expose a variable
that overrides the default (9).
Note: xz is often used to gain maximum possible compression, so
avoid lowering this if possible.
PR-URL: https://github.com/iojs/io.js/pull/1428
Reviewed-By: Rod Vagg <rod@vagg.org>
A common convention in auto* is to call make check rather than
make test. Let one alias the other
PR-URL: https://github.com/iojs/io.js/pull/1211
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Make PACKAGEMAKER customizable because PackageMaker is not necessarily
installed in /Developer on OSX anymore.
PR-URL: https://github.com/joyent/node/pull/9377
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
wrk is an optional tool that some of the http benchmarks uses. The removal
doesn't affect any users. Developers are assumed to install it before running
the tests.
This change reduces the tarball by 5%
PR-URL: https://github.com/iojs/io.js/pull/982
Reviewed-By: Rod Vagg <rod@vagg.org>
Slim the tarballs further by removing examples, documentation and test for
third party libraries. Also switch to checkout-index versus archive so we avoid
using tar.
PR-URL: https://github.com/iojs/io.js/pull/961
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rod Vagg <rod@vagg.org>
This commit adds the ability to enable userspace tracing with lttng
in io.js. It adds tracepoints for all the equivalent dtrace and ETW
tracepoints. To use these tracepoints enable --with-lttng on linux.
PR-URL: https://github.com/iojs/io.js/pull/702
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ryan Graham <ryan@strongloop.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>
Also added binary download documentation to the README.md and
GPG release key fingerprint for @rvagg.
PR-URL: https://github.com/iojs/io.js/pull/681
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
since .pkg-files already lives in out/ they're already gone. instead of
moving artefacts into out/ (which might mess with upload scripts),
delete their current location.
PR-URL: https://github.com/iojs/io.js/pull/323
Reviewed-By: Rod Vagg <rod@vagg.org>
Snapshots speed up start-up by a few milliseconds but are potentially
dangerous because of the fixed hash seed that is used for strings and
dictionaries, making collision denial-of-service attacks possible.
Release builds on iojs.org have snapshots disabled but source builds
did not, until now.
The risk for individual source builds is low; the binary gets a random
32 bits hash seed that should be hard to guess by an external attacker.
It's when binaries are distributed by, for example, a distro vendor
that the fixed hash seed becomes a vulnerability, because then it's
possible to target a large group of people at once.
People that really need the faster start-up time can use the new
--with-snapshot configure flag.
PR-URL: https://github.com/iojs/io.js/pull/585
Reviewed-By: Bert Belder <bertbelder@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Rod Vagg <rod@vagg.org>
It is unknown if there are any users of the ninja build and keeping it
around makes refactoring the build system more difficult. It's partly
broken (or at least, deeply inefficient) because it touches out/Makefile
every time.
PR-URL: https://github.com/iojs/io.js/pull/467
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Works with PackageMaker (old tool, discontinued but still
available for download from Apple).
index.xml is now templated to insert the version number.
PR-URL: https://github.com/iojs/io.js/pull/435
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
This only matters for the Makefile tarball target
as we aren't auto-building changelog.html at the moment
so the changes in tools/ are for completeness, but
not functional with the Markdown CHANGELOG.md.
PR-URL: https://github.com/iojs/io.js/pull/357
no review
check if xz exists on the host system and use if available, which makes
xz-tarballs available for distribution. also remove deps/zlib/contrib
since it's not in use -- shaves additional size from the tarballs.
also, slightly modify the .gitignore file to ignore these new archives.
PR-URL: https://github.com/iojs/io.js/pull/319
Reviewed-By: Rod Vagg <rod@vagg.org>
test: add test/addons to default test list
`make test-all` and `python tools/test.py` will now also run the addon
tests in test/addons.
test: remove test-npm from test-all make target
The test-npm target builds documentation, changes versioned files,
clutters the current working directory with artifacts, etc. In short,
it doesn't seem quite ready for inclusion in `make test-all`.
test: add test-ci target, reduced test-all
Add a test-ci target that is like test-all minus the (slow) pummel and
gc test suites.
This is primarily intended for the continuous integration, where we want
decent coverage but don't want to wait for ages for tests to complete.
cpplint: add -license/copyright to default filters
Commit 3e1b1dd ("Remove excessive copyright/license boilerplate") trips
up the copyright boilerplate style check. Disable it.
PR-URL: https://github.com/iojs/io.js/pull/314
Reviewed-By: Rod Vagg <rod@vagg.org>
not essential for doc build and currently broken because
tools/build_changelog.sh requires ./node.
leaving as separate make target so it can be invoked
separately in future.
PR-URL: https://github.com/iojs/io.js/pull/285
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
* rename the build targets
* update the test runner to use `out/{Debug,Release}/iojs`
* update the installer to install the iojs binary
* update one test that explicitly checks for the binary name
PR-URL: https://github.com/iojs/io.js/pull/262
Reviewed-By: Bert Belder <bertbelder@gmail.com>
The flag was used for a short while during the v0.5 development cycle,
four years ago. Remove it, it's long overdue.
PR-URL: https://github.com/iojs/io.js/pull/262
Reviewed-By: Bert Belder <bertbelder@gmail.com>
The targets upload to nodejs.org but that is the joyent/node website.
PR-URL: https://github.com/iojs/io.js/pull/262
Reviewed-By: Bert Belder <bertbelder@gmail.com>
For targets that need the binary: don't invoke `make all` as part of the
recipe, just depend on the $(NODE_EXE) target.
PR-URL: https://github.com/iojs/io.js/pull/262
Reviewed-By: Bert Belder <bertbelder@gmail.com>
I was originally going to do this after the v0.11.15 release, but as
that release is three weeks overdue now, I decided not to wait any
longer; we don't want the delta to get too big.
Conflicts:
lib/net.js
test/simple/simple.status
PR-URL: https://github.com/iojs/io.js/pull/236
Reviewed-By: Bert Belder <bertbelder@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
* Allow running tests in mixed parallel/sequential modes
* Add -J flag for running tests on all available CPUs
* Support TEST_THREAD_ID in test/common.js and use it for tmpDir and PORT
* make: use -J flag
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
PR-URL: https://github.com/iojs/io.js/pull/172
Fix: iojs/io.js#139
Remove the dependency on the 'sysconfig' module, it breaks the build
when $(PYTHON) is python 2.6.
PR-URL: https://github.com/node-forward/node/pull/39
Reviewed-By: Fedor Indutny <fedor@indutny.com>
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
Original commit message:
timers: use uv_now instead of Date.now
This saves a few calls to gettimeofday which can be expensive, and
potentially subject to clock drift. Instead use the loop time which
uses hrtime internally.
In addition to the backport, this commit:
- keeps _idleStart timers' property which is still set to
Date.now() to avoid breaking existing code that uses it, even if
its use is discouraged.
- adds automated tests. These tests use a specific branch of
libfaketime that hasn't been submitted upstream yet. libfaketime
is git cloned if needed when running automated tests.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Make the build rule depend on the build artifact (weakref.node) itself
rather than the directory it's built in. Depending on the directory
means that a build failure won't trigger a rebuild on the next
invocation because the directory's timestamp has been updated.
This is a back-port of commit 1189571 from the master branch that
hopefully fixes the following CI error:
executing: make test/gc/node_modules/weak/build/
make: *** No rule to make target `test/gc/node_modules/weak/build/'.
Command exited with non-zero: make test/gc/node_modules/weak/build/
Build step 'Execute NodeJS script' marked build as failure
Make the build rule depend on the build artifact (weakref.node) itself
rather than the directory it's built in. Depending on the directory
means that a build failure won't trigger a rebuild on the next
invocation because the directory's timestamp has been updated.
Don't run configure when the configure script has been touched. Doing so
would be okay if the Makefile passed the original arguments to configure
but it doesn't - it runs configure without any arguments, effectively
destroying the current configuration.
Remove this misfeature and instead print an error message telling the
user to (re-)run configure.
Preserve default install prefix seen in process.config, but use DESTDIR
for installing to deliniate 32/64 versions, avoid conflicts with PREFIX
settings in config.mk
Preserve default install prefix seen in process.config, but use DESTDIR
for installing to deliniate 32/64 versions, avoid conflicts with PREFIX
settings in config.mk
This change introduces support for the common PREFIX variable in the
Makefile and install.py, instead of having /usr/local hardcoded. This
makes it much easier to install node to custom locations e.g. in a
user's home directory.
The PREFIX variable defaults to /usr/local.
For example, to cross-compile from my OS X laptop for Raspberry Pi, you would
do something like:
$ make binary BINARYNAME=node-v`python tools/getnodeversion.py`-linux-arm-pi \
DESTCPU=arm CONFIG_FLAGS="--dest-os=linux"
- Improved styling of download links.
- index.html#download now redirects to /download/
- Added missing hyphens, and added the missing "and 64-bit" for the Mac
Installer.
This target compiles node with "/" as the prefix and installs into a directory
like: "node-v0.8.6-darwin-x86_64". Then it creates a gzipped-tarball of that
directory, called something like: "node-v0.8.6-darwin-x86_64.tar.gz".
The old installer was a JS script, which didn't work if node had been
cross-compiled for another architecture. Replace it with a python script.
Fixes #3807.
Make configure start gyp with the same python interpreter that is used to
run configure itself.
Fixes an issue where configure fails with a SyntaxError because the user
has multiple python binaries on his $PATH and the default one is too old.
In practice, it's not important to lint tests. We lint src/
and lib/, which is where we're more prone to make mistakes that
affect real-world situations in subtle ways, and where more
changes are made that ought to be kept in a consistent style.
Tests are a mess anyways, and no one cares.
This puts all images in doc/images/ and references them via
http://nodejs.org/images/.
Any complaints about copyright usage etc. can thus be node/joyent's
problem, rather than the problem of a downstream distribution channel.
Conflicts:
Makefile
