If you call z.flush();z.write('foo'); then it would try to write 'foo'
before the flush was done, triggering an assertion in the zlib binding.
Closes #4950
Consider the following example:
console.log(Buffer('ú').toString('ascii'));
Before this commit, the contents of the buffer was used as-is and hence it
prints 'ú'.
Now, it prints 'C:'. Perhaps not much of an improvement but it conforms to what
the documentation says it does: strip off the high bits.
Fixes #4371.
child.send can send net servers and sockets. Now that we have support
for dgram clusters this functionality should be extended to include
dgram sockets.
This adds the following to HTTP:
* server.setTimeout(msecs, callback)
Sets all new connections to time out after the specified time, at
which point it emits 'timeout' on the server, passing the socket as an
argument.
In this way, timeouts can be handled in one place consistently.
* req.setTimeout(), res.setTimeout()
Essentially an alias to req/res.socket.setTimeout(), but without
having to delve into a "buried" object. Adds a listener on the
req/res object, but not on the socket.
* server.timeout
Number of milliseconds before incoming connections time out.
(Default=1000*60*2, as before.)
Furthermore, if the user sets up their own timeout listener on either
the server, the request, or the response, then the default behavior
(destroying the socket) is suppressed.
Fix #3460
Now that highWaterMark increases when there are large reads, this
greatly reduces the number of calls necessary to _read(size), assuming
that _read actually respects the size argument.
Ability to return just the length of listeners for a given type, using
EventEmitter.listenerCount(emitter, event). This will be a lot cheaper
than creating a copy of the listeners array just to check its length.
The first example uses Readable, and shows the use of
readable.unshift(). The second uses the Transform class, showing that
it's much simpler in this case.
Document how to run the example on the home page in more detail.
Apparently our Windows brethren are prone to double-clicking on the
binary instead of running it from the command line.
Fixes #4854.
It seems like a good idea on the face of it, but lowWaterMarks are
actually not useful, and in practice should always be set to zero.
It would be worthwhile for writers if we actually did some kind of
writev() type of thing, but actually this just delays calling write()
and the overhead of doing a bunch of Buffer copies is not worth the
slight benefit of calling write() fewer times.
Running repl.start without the prompt set produces this error:
repl.js:95
throw new Error('An options Object, or a prompt String are required');
^
Error: An options Object, or a prompt String are required
at new REPLServer (repl.js:95:11)
at Object.exports.start (repl.js:321:14)
at Object.<anonymous> (/Users/dan/Dropbox/Documents/dev/nextgen/repl_test.js:5:6)
at Module._compile (module.js:449:26)
at Object.Module._extensions..js (module.js:467:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.runMain (module.js:492:10)
at process.startup.processNextTick.process._tickCallback (node.js:244:9)
http.ServerRequest and http.ClientResponse are merged into http.IncomingMessage
which has fields for both, and acts as a Readable Stream and EventEmitter.
Fixes #3851.
mainly to allow native addons to export single functions on `exports`
rather than being restricted to operating on an existing `exports`
object.
added link to addons repo in docs
Argument checks were simplified by setting all undefined/NaN or out of
bounds values equal to their defaults.
Also copy() tests had a flaw that each buffer had the same bit pattern at
the same offset. So even if the copy failed, the bit-by-bit comparison
would have still been true. This was fixed by filling each buffer with a
unique value before copy operations.
This adds a proxy for bytesWritten to the tls.CryptoStream. This
change makes the connection object more similar between HTTP and
HTTPS requests in an effort to avoid confusion.
See issue #4650 for more background information.
We detect for non-string and non-buffer values in onread and
turn the stream into an "objectMode" stream.
If we are in "objectMode" mode then howMuchToRead will
always return 1, state.length will always have 1 appended
to it when there is a new item and fromList always takes
the first value from the list.
This means that for object streams, the n in read(n) is
ignored and read() will always return a single value
Fixed a bug with unpipe where the pipe would break because
the flowing state was not reset to false.
Fixed a bug with sync cb(null, null) in _read which would
forget to end the readable stream
Removed range checks when writing float values, and removed a few
includes and defines. Also updated api docs to reflect that invalid 32
bit float is an unspecified behavior.
The first example in cluster.markdown requires NODE_DEBUG env to show
debug message.
And also fix the message because it was a little bit different with
the actual message.
Keeping list of all sockets that were sent to child process causes memory
leak and thus unacceptable (see #4587). However `server.close()` should
still work properly.
This commit introduces two options:
* child.send(socket, { track: true }) - will send socket and track its status.
You should use it when you want to receive `close` event on sent sockets.
* child.send(socket) - will send socket without tracking it status. This
performs much better, because of smaller number of RTT between master and
child.
With both of these options `server.close()` will wait for all sent
sockets to get closed.
Keeping list of all sockets that were sent to child process causes memory
leak and thus unacceptable (see #4587). However `server.close()` should
still work properly.
This commit introduces two options:
* child.send(socket, { track: true }) - will send socket and track its status.
You should use it when you want `server.connections` to be a reliable
number, and receive `close` event on sent sockets.
* child.send(socket) - will send socket without tracking it status. This
performs much better, because of smaller number of RTT between master and
child.
With both of these options `server.close()` will wait for all sent
sockets to get closed.
'Stability: 5' is described as 'Locked' not as 'API Locked'
in other documents.
For example:
- `/doc/api/assert.markdown`
- `/doc/api/util.markdown`
This word was injected in 192192a.
Allows for arbitrary path to executable spawned using `fork`. This
fixes some issues around running multiple versions of node with workers
and allows arbitrary IPC with compatible executables.
Fixes #3248.
While it's true that error objects have a history of getting snake_case
properties attached by the host system, it's a point of confusion to
Node users that comes up a lot. It's still 'experimental', so best to
change this sooner rather than later.
Noted in @shtylman's #3898, API stability notes are easy to overlook
in the html documentation. This can be especially troublesome if the API
is deprecated. This commit gives visual feedback by adding in a class
to the html docs when they're generated. The API headers with
corresponding colors are also listed in the 'About this Documentation'
page for easy reference.
Starting a line with `**bold**` text makes it think that it's a link,
and get confused.
This should really be fixed properly in the doc generator, but for now,
it's not a major issue. It's probably just a matter of updating marked.
Don't allow connections to stall indefinitely if the SSL/TLS handshake does
not complete.
Adds a new tls.Server and https.Server configuration option, handshakeTimeout.
Fixes #4355.
Use a default callback if the user omitted one. Avoids errors like the one
below:
fs.js:777
if (err) return callback(err);
^
TypeError: object is not a function
at fs.appendFile (fs.js:777:21)
at Object.oncomplete (fs.js:297:15)
This commit fixes the behavior of fs.lchmod(), fs.lchown() and fs.readFile()
when the callback is omitted. Before, they silently swallowed errors.
Fixes #4352.
This is a flag to make it easier for users to upgrade through the
breaking crypto change, and easier for us to switch it back if it's a
problem.
Explicitly set default encoding to 'buffer' in other tests, in case it
ever changes back.
crypto: Hash and Hmac default to buffers
crypto: Move Cipher encoding logic to JS
crypto: Move Cipheriv encoding logic to JS
crypto: Move Decipher encoding logic to JS
crypto: Move Decipheriv into JS, default to buffers
crypto: Move Sign class to JS
crypto: Better encoding handling in Hash.update
crypto: Move Verify class to JS
crypto: Move DiffieHellman to JS, default to buffers
crypto: Move DiffieHellmanGroup to JS, default to buffers
Also, create a test for this feature
* The 'close' event doesn't emit an error object.
* It's possible for a 'close' event to come after an 'end' event, contrary to
what the documentation said.
Fixes #4116.
Consolidates all the formatting options into an "options" object argument.
This is so that we don't have to be constantly remembering the order of
the arguments and so that we can add more formatting options easily.
Closes #4085.
Listen for the 'clientError' event that is emitted when a renegotation attack
is detected and close the connection.
Fixes test/pummel/test-https-ci-reneg-attack.js
This reverts commit 790d651f0d.
This makes Duplex streams unworkable, and would only ever be a special
case for HTTP responses, which is not ideal.
Intead, we're going to just bless the 'finish' event for all Writable
streams in 0.10
This commit changes the default value of the rejectUnauthorized option from
false to true.
What that means is that tls.connect(), https.get() and https.request() will
reject invalid server certificates from now on, including self-signed
certificates.
There is an escape hatch: if you set the NODE_TLS_REJECT_UNAUTHORIZED
environment variable to the literal string "0", node.js reverts to its
old behavior.
Fixes #3949.
fs.watch() is implemented on all supported platforms but, depending on the
object being watched, doesn't always work reliably (or at all).
Fixes #4005.
