/**
 * Tests that the server logs ops on the secondary if and only if they are slow to apply.
 * We should only report ops if they take longer than "slowMS" to apply on a secondary.
 * We intentionally target CRUD ops in this test, since we know we should be the only ones
 * issuing them. See below for details on how we simulate quickness and slowness.
 * @tags: [requires_fcv_44]
 */

(function() {
"use strict";

load("jstests/replsets/rslib.js");
load("jstests/libs/fail_point_util.js");

let name = "log_secondary_oplog_application";
let rst = ReplSetTest({name: name, nodes: 2});
rst.startSet();

let nodes = rst.nodeList();
rst.initiate({
    "_id": name,
    "members": [{"_id": 0, "host": nodes[0]}, {"_id": 1, "host": nodes[1], "priority": 0}]
});

let primary = rst.getPrimary();
let secondary = rst.getSecondary();

/**
 * Part 1: Issue a fast op and make sure that we do *not* log it.
 * We ensure the op is always considered fast by vastly increasing the "slowMS" threshold.
 */

// Create collection explicitly so the insert doesn't have to do it.
assert.commandWorked(primary.getDB(name).createCollection("fastOp"));
rst.awaitReplication();

// Set "slowMS" to a very high value (in milliseconds).
assert.commandWorked(secondary.getDB(name).setProfilingLevel(1, 60 * 60 * 1000));

// Issue a write and make sure we replicate it.
assert.commandWorked(primary.getDB(name)["fastOp"].insert({"fast": "cheetah"}));
rst.awaitReplication();

// The op should not have been logged.
assert.throws(function() {
    checkLog.contains(secondary, "cheetah", 1 * 1000);
});

/**
 * Part 2: Issue a slow op and make sure that we *do* log it when the sample rate is set to 1.
 * We use a failpoint in applyOplogEntryOrGroupedInserts which blocks after we read the time at the
 * start of the application of the op, and we wait there to simulate slowness.
 */

// Create collection explicitly so the insert doesn't have to do it.
assert.commandWorked(primary.getDB(name).createCollection("slowOp"));
rst.awaitReplication();

// Set "sampleRate" to 1 and "slowMS" to a low value (in milliseconds).
assert.commandWorked(secondary.getDB(name).setProfilingLevel(1, {sampleRate: 1, slowms: 20}));

// Hang right after taking note of the start time of the application.
let hangAfterRecordingOpApplicationsStartTimeFailPoint =
    configureFailPoint(secondary, "hangAfterRecordingOpApplicationStartTime");

// Issue a write and make sure we've hit the failpoint before moving on.
assert.commandWorked(primary.getDB(name)["slowOp"].insert({"slow": "sloth"}));
hangAfterRecordingOpApplicationsStartTimeFailPoint.wait();

// Wait for an amount of time safely above the "slowMS" we set.
sleep(0.5 * 1000);

// Disable the hangAfterRecordingOpApplicationsStartTime failpoint so the op finish can applying.
hangAfterRecordingOpApplicationsStartTimeFailPoint.off();

// Make sure we log that insert op.
rst.awaitReplication();
checkLog.contains(secondary, "sloth");

/**
 * Part 3: Issue a slow op and make sure that we do *not* log it when the sample rate is set to 0.
 */

// Set "sampleRate" to 0 and "slowMS" to a low value (in milliseconds).
assert.commandWorked(secondary.getDB(name).setProfilingLevel(1, {sampleRate: 0, slowms: 20}));

// Hang right after taking note of the start time of the application.
hangAfterRecordingOpApplicationsStartTimeFailPoint =
    configureFailPoint(secondary, "hangAfterRecordingOpApplicationStartTime");

// Issue a write and make sure we've hit the failpoint before moving on.
assert.commandWorked(primary.getDB(name)["slowOp"].insert({"slow": "turtle"}));
hangAfterRecordingOpApplicationsStartTimeFailPoint.wait();

// Wait for an amount of time safely above the "slowMS" we set.
sleep(0.5 * 1000);

// Disable the hangAfterRecordingOpApplicationsStartTime failpoint so the op finish can applying.
hangAfterRecordingOpApplicationsStartTimeFailPoint.off();

// Ensure that the write was replicated.
rst.awaitReplication();

// The op should not have been logged.
assert.throws(function() {
    checkLog.contains(secondary, "turtle", 1 * 1000);
});

/**
 * Part 4: Issue a slow op and verify that we log it when the sample rate is 0 but log verbosity
 * is set to 1.
 */

// Set the log verbosity for the replication component to 1.
setLogVerbosity(rst.nodes, {"replication": {"verbosity": 1}});

// Hang right after taking note of the start time of the application.
hangAfterRecordingOpApplicationsStartTimeFailPoint =
    configureFailPoint(secondary, "hangAfterRecordingOpApplicationStartTime");

// Issue a write and make sure we've hit the failpoint before moving on.
assert.commandWorked(primary.getDB(name)["slowOp"].insert({"slow": "snail"}));
hangAfterRecordingOpApplicationsStartTimeFailPoint.wait();

// Wait for an amount of time safely above the "slowMS" we set.
sleep(0.5 * 1000);

// Disable the hangAfterRecordingOpApplicationsStartTime failpoint so the op finish can applying.
hangAfterRecordingOpApplicationsStartTimeFailPoint.off();

// Ensure that the write was replicated.
rst.awaitReplication();

// Make sure we log that insert op.
checkLog.contains(secondary, "snail");

rst.stopSet();
})();