Move the private _PyInterpreterID C API to the internal C API: add a
new pycore_interp_id.h header file.
Remove Include/interpreteridobject.h and
Include/cpython/interpreteridobject.h header files.
in the case of an empty FRAMEWORKALTINSTALLLAST, this patch prevents leaving
an astray linebreak and two tabs in the resulting Makefile.
Before change:
```
.PHONY: commoninstall
commoninstall: check-clean-src \
altbininstall libinstall inclinstall libainstall \
sharedinstall altmaninstall \
```
After change (with empty FRAMEWORKALTINSTALLLAST):
```
.PHONY: commoninstall
commoninstall: check-clean-src \
altbininstall libinstall inclinstall libainstall \
sharedinstall altmaninstall
```
The Tier 2 opcode _IS_ITER_EXHAUSTED_LIST (and _TUPLE)
didn't set it->it_seq to NULL, causing a subtle bug
that resulted in test_exhausted_iterator in list_tests.py
to fail when running all tests with -Xuops.
The bug was introduced in gh-106696.
Added this as an explicit test.
Also fixed the dependencies for ceval.o -- it depends on executor_cases.c.h.
When running 'make regen-cases' just to check whether anything changed,
it's annoying that even if nothing changes, the output files are touched,
causing an expensiv rebuild of _bootstrap_python and anything it creates.
So use consistently for all output files.
- Tweak uops debugging output
- Fix the bug from gh-106290
- Rename `SET_IP` to `SAVE_IP` (per https://github.com/faster-cpython/ideas/issues/558)
- Add a `SAVE_IP` uop at the start of the trace (ditto)
- Allow `unbound_local_error`; this gives us uops for `LOAD_FAST_CHECK`, `LOAD_CLOSURE`, and `DELETE_FAST`
- Longer traces
- Support `STORE_FAST_LOAD_FAST`, `STORE_FAST_STORE_FAST`
- Add deps on pycore_uops.h to Makefile(.pre.in)
Remove the following functions from the C API, move them to the internal C
API: add a new pycore_modsupport.h internal header file:
* PyModule_CreateInitialized()
* _PyArg_NoKwnames()
* _Py_VaBuildStack()
No longer export these functions.
* Remove private _PyTraceMalloc C API functions: move them to the
internal C API.
* Don't export most of these functions anymore, but still export
_PyTraceMalloc_GetTraceback() used by tests.
* Rename Include/tracemalloc.h to Include/cpython/tracemalloc.h
Remove the "cpython/pytime.h" header file: it only contained private
functions. Move functions to the internal pycore_time.h header file.
Move tests from _testcapi to _testinternalcapi. Rename also test
methods to have the same name than tested C functions.
No longer export these functions:
* _PyTime_Add()
* _PyTime_As100Nanoseconds()
* _PyTime_FromMicrosecondsClamp()
* _PyTime_FromTimespec()
* _PyTime_FromTimeval()
* _PyTime_GetPerfCounterWithInfo()
* _PyTime_MulDiv()
Remove the following private functions of the C API:
* _PyCodecInfo_GetIncrementalDecoder()
* _PyCodecInfo_GetIncrementalEncoder()
* _PyCodec_DecodeText()
* _PyCodec_EncodeText()
* _PyCodec_Forget()
* _PyCodec_Lookup()
* _PyCodec_LookupTextEncoding()
Move these functions to a new pycore_codecs.h internal header file.
These functions are no longer exported.
Added a new, experimental, tracing optimizer and interpreter (a.k.a. "tier 2"). This currently pessimizes, so don't use yet -- this is infrastructure so we can experiment with optimizing passes. To enable it, pass ``-Xuops`` or set ``PYTHONUOPS=1``. To get debug output, set ``PYTHONUOPSDEBUG=N`` where ``N`` is a debug level (0-4, where 0 is no debug output and 4 is excessively verbose).
All of this code is likely to change dramatically before the 3.13 feature freeze. But this is a first step.
This ensures that `commoninstall` is completed before `bininstall` is
started when parallel builds are used (`make -j install`), and so the
`python3` symlink is only installed after all standard library modules
are installed.
Co-authored-by: Zachary Ware <zachary.ware@gmail.com>
The _xxsubinterpreters module was meant to only use public API. Some internal C-API usage snuck in over the last few years (e.g. gh-28969). This fixes that.
Remove functions in the C API:
* PyEval_AcquireLock()
* PyEval_ReleaseLock()
* PyEval_InitThreads()
* PyEval_ThreadsInitialized()
But keep these functions in the stable ABI.
Mention "make regen-limited-abi" in "make regen-all".
* Remove the Lib/test/imghdrdata/ directory.
* Copy 5 pictures (gif, png, ppm, pgm, xbm) from removed
Lib/test/imghdrdata/ to a new Lib/test/tkinterdata/ directory.
* Update Sphinx from 4.5 to 6.2 in Doc/requirements.txt.
* socket_helper.transient_internet() no longer imports nntplib to
catch nntplib.NNTPTemporaryError.
* ssltests.py no longer runs test_nntplib.
* "make quicktest" no longer runs test_nntplib.
* WASM: remove nntplib from OMIT_NETWORKING_FILES.
* Remove mentions to nntplib in the email documentation.
Apply BOLT optimizations to libpython for shared builds. Most of the C
code is in libpython so it is critical to apply BOLT there fully realize
BOLT benefits.
This change also reworks how BOLT instrumentation is applied. It
effectively removes the readelf based logic added in gh-101525 and
replaces it with a mechanism that saves a copy of the pre-bolt binary
and restores that copy when necessary. This allows us to perform BOLT
optimizations without having to manually delete the output binary to
force a new bolt run.
Also:
- add a clean-bolt target for purging BOLT files and hook that up to the
clean target
- .gitignore BOLT related files
Before and after this refactor, `make` will no-op after a previous run.
Both versions should also share common make DAG deficiencies where
targets fail to trigger as often as they need to or can trigger
prematurely in certain scenarios. e.g. after this change you may need to
`rm profile-bolt-stamp` to force a BOLT run because there aren't
appropriate non-phony targets for BOLT's make target to depend on.
To make it easier to iterate on custom BOLT settings, the flags to pass
to instrumentation and application are now defined in configure and can
be overridden by passing BOLT_INSTRUMENT_FLAGS and BOLT_APPLY_FLAGS.
This implements PEP 695, Type Parameter Syntax. It adds support for:
- Generic functions (def func[T](): ...)
- Generic classes (class X[T](): ...)
- Type aliases (type X = ...)
- New scoping when the new syntax is used within a class body
- Compiler and interpreter changes to support the new syntax and scoping rules
Co-authored-by: Marc Mueller <30130371+cdce8p@users.noreply.github.com>
Co-authored-by: Eric Traut <eric@traut.com>
Co-authored-by: Larry Hastings <larry@hastings.org>
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
By convention make targets that don't refer to a file have a dependency
on the fake .PHONY target/file. This ensures that these targets are
always evaluated because there is no rule to create a .PHONY file
and that will force make to think the rule is out of date and needs
to be rebuilt.
This commit consistently associates virtual targets with .PHONY by
declaring the .PHONY dependency immediately above the make rule. This
should avoid race conditions and avoidable rebuilds across multiple make
invocations.
Replaces our built-in SHA3 implementation with a verified one from the HACL* project.
This implementation is used when OpenSSL does not provide SHA3 or is not present.
3.11 shiped with a very slow tiny sha3 implementation to get off of the <=3.10 reference implementation that wound up having serious bugs. This brings us back to a reasonably performing built-in implementation consistent with what we've just replaced our other guaranteed available standard hash algorithms with: code from the HACL* project.
---------
Co-authored-by: Gregory P. Smith <greg@krypto.org>
Deep-frozen code objects are cannot be shared (currently) by
interpreters, due to how adaptive specialization can modify the
bytecodes. We work around this by only using the deep-frozen objects in
the main interpreter. This does incur a performance penalty for
subinterpreters, which we may be able to resolve later.
This avoids conflicting with the shebang of the called scripts as well
as avoiding hard errors on platforms where the called script runs a
failing unchecked command in the usual course of checking since
`SHELL=/bin/sh -e` as of a90863c.
Fixes gh-103776.
* The majority of the monitoring code is in instrumentation.c
* The new instrumentation bytecodes are in bytecodes.c
* legacy_tracing.c adapts the new API to the old sys.setrace and sys.setprofile APIs
Set `SHELL = /bin/sh -e` to ensure that complex recipes fail on the first error rather than incorrectly reporting success.
Co-authored-by: Zachary Ware <zach@python.org>
The function is like Py_AtExit() but for a single interpreter. This is a companion to the atexit module's register() function, taking a C callback instead of a Python one.
We also update the _xxinterpchannels module to use _Py_AtExit(), which is the motivating case. (This is inspired by pain points felt while working on gh-101660.)
